Thermostat in Z-Wave hidden...
Thermostat in Z-Wave hidden micromodule format for heat and cold. It allows you to control HVAC fan coil systems with a Z-Wave home automation controller. The Qubino Heat & Cool thermostat is a module for coil and fan-coil systems with 2 and 4 tubes. The thermostat module can be connected to the existing fan coil system.
Warning: Last items in stock!
Out of stock
The Qubino Flush Heat & Cool Thermostat micromodule is ideal for controlling a four-pipe fan coil (HVAC) unit (with your mobile phone or smartphone), you can control it remotely through the Z-Wave network or through switches It also measures the energy consumption and supports the connection of a digital temperature sensor.This thermostat for cold and heat Z-Wave allows to control fan coils of 4 lines or a cold emitter with your smartphone.
Qubino Flush Heat and Cool Thermostat is a module that includes everything compactly, in addition to a compatible Qubino probe. This hidden Qubino module is specially designed for use in cooling and heating, through a series of special parameters.
The Qubino Flush Heat & Cool Thermostat thermostat is ideal for remotely controlling a four-pipe fan coil (HVAC) unit .
The Z-Wave thermostat Qubino Flush Heat & Cool Thermostat is a micromodule that occupies less space than any other module with which it is compared to any other competitor and will fit easily into any conventional mechanism box.
The Z-Wave thermostat module, Qubino Flush Heat & Cool Thermostat , measures the electrical consumption of the connected electrical device and, by itself, when it is in standby, it only consumes 0.4 W.
The Qubino Flush Heat & Cool Thermostat thermostat can operate over a wide temperature range from cold -10ºC to suffocating 40ÚC (14Ú 104ÚF).
By having a more than reduced size, and a specially designed encapsulation, it offers that the placement in a mechanism box simplifies it completely. The process of installation, tested and approved by professional electricians is the simplest
Qubino's Z-Wave modules are install-and-forget products. The Qubino products that we offer, are manufactured to last, so they only use electronic components that meet the most demanding levels of quality. Our modules are also the most tested Z-Wave micromodules on the market. The Slovenian Institute of Quality and Measurement (SIQ), an independent European entity, checks the quality of the actual parameters of our products, including temperature increases, manufacturing, insulation resistance, electrical consumption and overloads according to European standards of the highest quality according to the specification of standard EN 60669-2-1.
Blog Article: We tested the Qubino Heat & Cool fan coil thermostat
The Qubino Flush Heat & Cool Thermostat micromodule has 27 additional parameters for expert use. Some of the most useful are:
This retractable assembly unit and the probe will allow to manage a thermostat system through its domotic controller. The module itself manages the air conditioning function through a set that can be added. Through the temperature measured in the probe, the module adjusts the air conditioning operation in order to reach that level.
You can put the module in two modes: Auto and Off. In automatic mode, the module will cause the device connected to its output to reach the setpoint of the thermostat remotely.
In the shutdown mode of the matched output device will be changed in order to decrease the room temperature (up to a set temperature limit).
This module provides two outputs: one for heating and the other for a ventilation / air-conditioning (HVAC) conditioning system. Whether for a heating or cooling system, there are several options: time before switching hysteresis on and off, ...
The module also provides two configurable inputs. These inputs can be bistable or monostable switches or several sensors:
Input 1 can be used to activate or deactivate the thermostat (auto / off) or determine the status of the opening of the heating valve as a sensor.
Input 2 can be used to set the thermostat to a temperature set point (adjustable) or determine the status of the heating valve according to a condensation sensor.
The module has different configurable functions:
Sending the adjusted temperature through the Z-Wave controller
The choice of control type output: relay output can be configured in case the module is connected to the heating supply (NO), or in a pilot cable input in which they are reversed and Off (NC). In the same way you can manage the start and stop of the air conditioning.
Upper and lower hysteresis: defines the minimum temperature difference between the temperature set point and the measured temperature for the module triggers or interrupting the heating
Frost mode: Specifies a minimum temperature for the module related to heating. The activation of this command, causes that the heating will never fall below the specified temperature, preventing water from freezing in the pipes.
With a very low power consumption of the micromóduco itself, less than 0.4W, the module measures the power consumption of the electrical device connected in watts and the total consumption in kWh. Energy consumption data can be easily collected and added to the consumption history if your controller supports it.
The module can be used as an extension for the control of the heating / cooling system. It has the possibility of connecting a digital temperature sensor.
|Feeding:|| 110 230 VAC ± 10% |
50/60 Hz, (24 30 VDC)
|Maximum AC output load (resistive load) *||2 X 4 A / 230 VAC|
|Maximum DC output load (resistive load) *||2 X 4 A / 30 VDC|
|Output circuit power of AC output (resistive load):||2 X 920 W (230 VAC)|
|Output circuit power of DC output (resistive load):||2 X 96 W (24 VDC)|
|Accuracy of the power measurement:|| P = 0-200 W, +/- 2 W |
P> 200 W, +/- 3%
|Digital temperature sensor range:||-50 ° ~ + 125 ° C, resolution 0.1 ° C|
|Cable length of the digital temperature sensor:||1000 mm|
|Operating Temperature:||-10 ° ~ + 40 ° C|
|Distance||up to 30 m indoors (depending on materials)|
|Dimensions (WxHxD)||41.8 x 36.8 x 15.4 mm|
|(packaging)||(115 x 96 x 22)|
|Weight (including packaging)||48 g (64 g)|
|Electric consumption on standby||0.4 W|
|For installation in mechanism boxes||Ø e 60 mm or 2 M|
|Switching by:||Relay (x2)|