Viewed products





Confianza Online


Qubino Flush On / Off Thermostat

ZMNHID1

New

The Qubino Flush On / Off thermostat module for Z-Wave + heating can be used to control electric heating or electric underfloor heating systems, underfloor heating by water, electric water heater, hot water pump, electric radiator, etc. ..

More details

In Stock

65,90 €

Technical characteristics

Technology Z-Wave Plus
Characteristic Thermostat

More info

The only "invisible" Z-Wave thermostat in the world

The Qubino On / Off Thermostat micromodule is ideal for controlling setpoint temperature and temperature measurement for use in both electric and hot water based underfloor heating systems, in addition to other systems mentioned.

What is it for?

The module Qubino On / Off Thermostat Z-Wave + can be used to directly control a system of electric heating or electric underfloor heating, underfloor heating by water, electric water heater, hot water pump, electric radiator, etc ...

This Z-Wave plus thermostat micromodule can be connected to your existing both electric and hot water floor heating systems.

You can control it remotely through the Z-Wave network or through wall switches. It also measures the power consumption and supports the connection of a digital temperature sensor (included).

The smallest thermostat

The Z-Wave thermostat Qubino Flush On / Off thermostat is a micromodule that occupies less space than any other module with which it is compared to any other competitor and will fit easily into any conventional mechanism box.

Energy control

The Z-Wave thermostat module, Qubino Flush On / Off thermostat, measures the electrical consumption of the connected electrical device and in itself, when it is in standby, only consumes 0.4 W. Amazing!

Very versatile

The Qubino Flush On / Off thermostat thermostat can operate through a wide temperature range from cold -10ºC to suffocating 40ÚC (14Ú 104ÚF).

The simplest installation

By having a more than reduced size, and a specially designed encapsulation, it offers that the placement in a mechanism box simplifies it completely. The process of installation, tested and approved by professional electricians is the simplest

The most proven and reliable Z-Wave modules

Qubino's Z-Wave modules are install-and-forget products. The Qubino products that we offer, are manufactured to last, so they only use electronic components that meet the most demanding levels of quality. Our modules are also the most tested Z-Wave micromodules on the market. The Slovenian Institute of Quality and Measurement (SIQ), an independent European entity, checks the quality of the actual parameters of our products, including temperature increases, manufacturing, insulation resistance, electrical consumption and overloads according to European standards of the highest quality according to the specification of standard EN 60669-2-1.

Specifications and technical schemes:

Mounting scheme in AC 220v:

AC Schematic electrical installation of zwave thermostat by Qubino

Diagram of assembly in DC 24v:

AC Schematic electrical installation of zwave thermostat by Qubino

Additional parameters for professionals.

The Qubino On / Off Thermostat micromodule has 32 additional parameters for expert use. Some of the most useful are:

  • Configuration of mono-stable or bi-stable switches
  • Save the relay status after a power cut
  • Power report in watts or power change

Feeding: 110 230 VAC ± 10%
50/60 Hz, (24 30 VDC)
Maximum AC output load (resistive load) * 1 X 10 A / 230 VAC
Maximum DC output load (resistive load) * 1 X 10 A / 30 VDC
Output circuit power of AC output (resistive load): 2,300 W (230 VAC)
Output circuit power of DC output (resistive load): 240 W (24 VDC)
Accuracy of the power measurement: P = 5 50 W, +/- 3 W
P> 50 W, +/- 3%
Digital temperature sensor range: -50 ° ~ + 125 ° C, resolution 0.1 ° C
Cable length of the digital temperature sensor: 1000 mm
Operating Temperature: -10 ° ~ + 40 ° C
Distance up to 30 m indoors (depending on materials)
Dimensions (WxHxD) 41.8 x 36.8 x 15.4 mm
(packaging) (115 x 96 x 22)
Weight (including packaging) 48 g (64 g)
Electric consumption on standby 0.4 W
For installation in mechanism boxes Ø e 60 mm or 2 M
Switching by: Relay

Meets CE and ROHS Certifications

Download

Reviews

Write a review

Qubino Flush On / Off Thermostat

Qubino Flush On / Off Thermostat

The Qubino Flush On / Off thermostat module for Z-Wave + heating can be used to control electric heating or electric underfloor heating systems, underfloor heating by water, electric water heater, hot water pump, electric radiator, etc. ..

Accessories

20 other products in the same category:

Customers who bought this product also bought: