Z-Wave wireless technology electronic...
Z-Wave wireless technology electronic thermostat for wall installation in recessed box of mechanisms for the regulation of electric heating . Very suitable for electric underfloor heating or heating by electric radiators. Black color
Warning: Last items in stock!
Out of stock
The Heatit thermostat HEAE5430499 is a Z-Wave electronic thermostat for wall-mounted installation in a conventional-standard size box.
A thermostat to control the temperature in an intelligent, innovative way that incorporates Z-Wave plus technology for the regulation of electric underfloor heating (or electric radiators). The display will show the ambient temperature, either in the room (room) or on the floor.
This thermostat has an embedded Z-Wave Plus chip that can be connected to your Z-Wave network and / or your Z-Wave home automation control unit. The thermostat is equipped with a unipolar relay and can handle electrical loads of up to 16A / 3600W to 230V directly connected to its outputs. If the load is greater, the thermostat can be connected to a contactor. The device can be used together with 2 external temperature sensors and shows the ambient temperature either in the room or on the floor. Sensitive-touch buttons are used to set the desired temperatures.
It can be used with two external temperature sensors. Equipped with an LCD screen, the actual temperature of the room appears by default in the thermostat. The thermostat has two programs, CO - Comfort mode and ECO - Economy mode.
Next, you have two different adjustment points for the different modes:
"CO - Mode: Used for normal use Example: 22 ° C
"ECO - Mode: It is a maintenance method that can be used if the thermostat is installed in a room or a house that is used very little.The ECO mode can also be activated by pilot wire, if it is connected. C