Viewed products





Confianza Online


Heatit Termostato de pared Z-Wave Blanco View larger

Product Under Order

Heatit Wall Thermostat 3600W 16A Z-Wave White

HEAE5430499-B

New

Z-Wave wireless technology electronic thermostat for wall installation in recessed box of mechanisms for the regulation of electric heating . Very suitable for electric underfloor heating or heating by electric radiators. White color.

More details

Out of stock

149,00 €

Technical characteristics

Technology Z-Wave Plus

More info

The Heatit thermostat HEAE5430499 is a Z-Wave electronic thermostat for wall-mounted installation in a conventional-standard size box.

A thermostat to control the temperature in an intelligent, innovative way that incorporates Z-Wave plus technology for the regulation of electric underfloor heating (or electric radiators). The display will show the ambient temperature, either in the room (room) or on the floor.

This thermostat has an embedded Z-Wave Plus chip that can be connected to your Z-Wave network and / or your Z-Wave home automation control unit such as Vera, Fibaro, eedomus, Zipato, Popp, etc. The thermostat is equipped with a unipolar relay and can handle electrical loads of up to 16A / 3600W to 230V directly connected to its outputs. If the load is greater, the thermostat can be connected to a contactor. The device can be used together with 2 external temperature sensors and shows the ambient temperature either in the room or on the floor. Touch-sensitive type buttons are used to set the desired temperatures manually.

It can be used with two external temperature sensors. Equipped with an LCD screen, the actual temperature of the room appears by default in the thermostat. The thermostat has two programs, CO - Comfort mode and ECO - Economy mode.

Next, you have two different adjustment points for the different modes:

"CO - Mode: Used for normal use Example: 22 ° C

"ECO - Mode: It is a maintenance method that can be used if the thermostat is installed in a room or a house that is used very little.The ECO mode can also be activated by pilot wire, if it is connected. C

Includes a temperature sensor for the floor of 4 mm and length 3 m

Heatit thermostat

Functions

  • Stay sensor
  • Floor sensor
  • Temperature limiter
  • Power regulator
  • Chip Z-Wave 500 series (Z-Wave Plus)
  • 7 segment LCD screen
  • It can be used in connection with NTC type sensors
  • Child lock mode
  • Backlight
  • Calibration
  • 8 scenarios

Download

Extended Z-Wave info

Name: Heatit Z-Wave
Manufacturer:HEATIT
Identifier:TF021
Z-Wave Certification Number:ZC10-15020003
Hardware Plattform:ZM5202
FLiRS:NO
Role Type:Always On Slave
Short Description:Heatit Z-Wave is an electronic thermostat for mounting in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected to Home Automation systems like Fibaro, Sensio, Vera, Zipato and others. The display will show the actual room temperature. By pressing the buttons, the display will show the set value. Heatit Z-Wave is equipped with a single-pole switch. The thermostat can handle loads up to 16A/3600W at 230V. If the load is greater than this, the thermostat needs to be connected to a contactor. It can be used with two external temperature sensors.
Description:Heatit Z-Wave is an electronic thermostat for mounting in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected to Home Automation systems like Fibaro, Sensio, Vera, Zipato and others. The display will show the actual room temperature. By pressing the buttons, the display will show the set value. Heatit Z-Wave is equipped with a single-pole switch. The thermostat can handle loads up to 16A/3600Wat 230V. If the load is greater than this, the thermostat needs to be connected to a contactor. It can be used with two external temperature sensors. FUNCTIONS • Room sensor • Floor sensor • Temperature limiter • Power regulator • Z-Wave chip 500 series • Week program/setback temperature via gateway • Setback mode • 7-segment LCD-screen • Can be used in connection with diff erent NTC-sensors • Lock mode/child lock • Backlight • Calibration • 8 scenarios CONNECTION CLAMPS Use 1,5 mm² or 2,5 mm² cables according to power need. TECHNICAL DATA Rated voltage: 230V 50/60Hz Max. load: 3600W Max. current: 16A Power consumption: 1,5W Protection class: IP21 Min/Max installation temp: -20°C to 40°C Min/Max operating temp: 5°C to 40°C Temperature intervals: Floor sensor 5°C to 40°C Room sensor 5°C to 40°C Hysteresis: 0,5°C Sensor values: 0°C 29,1 kOhm 10°C 18,6 kOhm 15°C 15,1 kOhm 20°C 12,2 kOhm 25°C 10,0 kOhm Switch: Single-pole

Manual download HERE.

Group
Max Nodes
Description
1
8
Z-Wave Plus Lifeline
Number
Size (Bytes)
Default Value
Name
Description
Basic
COMMAND_CLASS_BASIC
Exclusion
INCLUSION/EXCLUSION
To include the thermostat to your home automation gateway, press Center (confirm) for 10 seconds.
The display will show OFF. Press Right (down) 4 times till you see Con in the display.
Now start add device in your home automation software. Start inclusion mode by pressing Center (confirm) for approximately
2 seconds. The inclusion/exclusion icon will appear in the display. Confirmation will show Inc/EcL in the display. If inclusion
fails, Err (error) will appear.
Leave programming mode by choosing ESC in menu. Your thermostat is ready for use with default settings.
Inclusion
INCLUSION/EXCLUSION
To include the thermostat to your home automation gateway, press Center (confirm) for 10 seconds.
The display will show OFF. Press Right (down) 4 times till you see Con in the display.
Now start add device in your home automation software. Start inclusion mode by pressing Center (confirm) for approximately
2 seconds. The inclusion/exclusion icon will appear in the display. Confirmation will show Inc/EcL in the display. If inclusion
fails, Err (error) will appear.
Leave programming mode by choosing ESC in menu. Your thermostat is ready for use with default settings.
Factory Reset
FACTORY RESET - RES
By pressing buttons Left and Center (up and confirm) for 20 seconds, the thermostat will perform a complete factory reset.
NB! Please use this procedure only when the primary controller is missing or otherwise inoperable.

 

Reviews

Write a review

Heatit Wall Thermostat 3600W 16A Z-Wave White

Heatit Wall Thermostat 3600W 16A Z-Wave White

Z-Wave wireless technology electronic thermostat for wall installation in recessed box of mechanisms for the regulation of electric heating . Very suitable for electric underfloor heating or heating by electric radiators. White color.

29 other products in the same category:

Customers who bought this product also bought: