Viewed products





Confianza Online


Indoor siren Z-Wave + by ZIPATO

ZIP-PSE02

New

The Zipato Z-Wave + indoor siren offers different alarm sounds and a warning light thanks to its independent flash

More details

In Stock

71,10 €

-10%

79,00 €

Technical characteristics

Technology Z-Wave Plus

More info

Warning: This siren is fully compatible with the Zipato driver. The different shades that are currently offered are not compatible with other domotic controllers.


This siren can be included and operated from a Z-Wave network with other certified devices
This includes the audible warning siren and a warning light with a flash. As for the sound alert, it can be derived from 6 different sounds:
- Door warning
- Arm / disarm
- Intrusion Alarm
- Fire Alerts
- Ambulance
- Police


When the siren receives a signal so that the alarm and flash can be activated, or simply the alarm, or simply flash.

The siren design allows easy connection to any type of wall or recessed box to hide the power cord. Tampering or tampering is used to activate the alarm if someone tries to take away the siren. Also the siren is equipped with a battery takes over in case the siren loses power supply.


CHARACTERISTICS:
110dB siren
Z-Wave +
6 sounds can be selected: Doorbell, armed / disarmed, intrusion alarm, fire alarm, ambulance, Police.
Self-protection contact
Easy to install
Low energy consumption

TECHNICAL CHARACTERISTICS :
Type: Z-Wave slave
Power supply: 5 V
Battery: 1150mAh
Frequency: 868.42 MHz
Radio range: 40 m in the open field
Volume of the siren: 110 dB
Operating temperature: -10 ° C to 40 ° C
Operating humidity: 85% maximum
Dimensions: 110 x 110 x 19 mm
Certifications: FCC part15.249 / EN300 220-1 /

Extended Z-Wave info

Name: Indoor Siren, Multisound, Z-wave
Manufacturer:Zipato
Identifier:ph-pse02.eu
Z-Wave Certification Number:ZC10-17055596
Hardware Plattform:SD3502
FLiRS:NO
Role Type:Always On Slave
Short Description:Zipato Indoor Siren is a wireless siren, based on Z-Wave technology.
Description:Zipato Indoor Siren is a wireless siren, based on Z-Wave technology. It is the Z-Wave plus product, it supports the security, OTA... all the newest features of the Z-Wave technology.

Manual download HERE.

Group
Max Nodes
Description
1
8
Z-Wave Plus Lifeline
Number
Size (Bytes)
Default Value
Name
Description
29
1
0
Disable Alarm
Disable the alarm function. 1: Disable Alarm, 0: Enable Alarm. Caution: After the power up, this configuration always be 0.
31
1
6
Alarm Duration
Play alarm sound duration, 1 tick is 30 seconds. Default is 3 minutes, maximum is 63.5 minutes 0: means never auto stop.
7
1
0
Customer Function
Customer function switch, using bit control.
Notification V4
COMMAND_CLASS_NOTIFICATION_V4
Association Group Info
COMMAND_CLASS_ASSOCIATION_GRP_INFO
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Basic
COMMAND_CLASS_BASIC
Configuration
COMMAND_CLASS_CONFIGURATION
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V2
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Notification V4
COMMAND_CLASS_NOTIFICATION_V4
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Sensor Binary V2
COMMAND_CLASS_SENSOR_BINARY_V2
Switch Binary
COMMAND_CLASS_SWITCH_BINARY
Version V2
COMMAND_CLASS_VERSION_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Inclusion
1. Have Z-Wave Controller entered inclusion mode.

2. Pressing tamper key three times within 1.5 seconds

to enter the inclusion mode.

3. After add successful, the LED will light ON 1 second
Exclusion
1. Have Z-Wave Controller entered exclusion mode.

2. Pressing tamper key three times within 1.5 seconds to enter the exclusion mode.

Node ID has been excluded.
Factory Reset
Notice: Use this procedure only in the event that the primary controller is lost or otherwise inoperable.

1. Pressing tamper key four times within 1.5 seconds and do not release the tamper key in the 4 pressed, and the LED will light ON.

2. After 3 seconds the LED will turn OFF, after that within 2 seconds, release the tamper key. If successful, the LED will light ON one second. Otherwise, the LED will flash once.

3. IDs are excluded and all settings will reset to factory default.
Additional Special Features
Tamper Report

When the tamper key is pressed over 5 seconds. The device will into

the alarm state. In that state, if the tamper key be released, the device will unsolicited to send the report to the nodes in the group 1.
Color
If the product is only available in one color, pick the color from the list.
Firmware Updatable
Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.
Supported Notification Types
Select the Notification Types that the product handles (controllers), or sends (slaves).

 

Reviews

Grade 
01/23/2019

gran recomendación del servicio técnico

ME aconsejaron esta sirena para interior y como siempre, la acertaron. Va perfecta y muy fácil de instalar

Write your review!

Write a review

Indoor siren Z-Wave + by ZIPATO

Indoor siren Z-Wave + by ZIPATO

The Zipato Z-Wave + indoor siren offers different alarm sounds and a warning light thanks to its independent flash

10 other products in the same category:

Customers who bought this product also bought: