Pack of 3 Qubino Z-Wave + dimmer...
Pack of 3 Qubino Z-Wave + dimmer modules or dimmers for mounting on a DIN rail electrical panel.
Warning: Last items in stock!
This Z-Wave module is used to control and regulate lamps or to control the speed of a fan. It can be controlled either through the Z-Wave network or through a wall switch connected to it.
The module is designed to be mounted inside a cabinet or electrical rack on a DIN rail. It also measures the energy consumption of the connected loads. It also has an input for the connection of a temperature sensor that can be purchased separately.
The Qubino DIN Dimmer is also designed to act as a repeater to improve the range and stability of the Z-Wave network.
Finally, it should be noted that the brand QUBINO has established strong commitments in quality and sustainability: the high performance components have been carefully selected. Multiple quality control tests were also carried out on the module to ensure maximum durability (tough enough to operate at temperatures from -10 ° C to +40 ° C).
Control and regulate remote lighting or other devices susceptible to regulation
It is placed towards the electrical panel, installed on DIN rail
Enables ON / OFF / DIM
Uses MOSFET technology: compatible with low voltage halogen lamps with electronic transformer, dimmable compact fluorescent lamps and dimmable LED
Integrates the 500 chip series (Z-Wave +)
Communication 250% faster compared to standard Z-Wave devices
The world's first Z-Wave DIN rail unit
Very low power consumption of up to 0.7W
Operating temperature -10 to 40 ° C
Analog temperature sensor connector
Integrates energy consumption measurement
Power supply: 110 - 230 VAC ± 10% 50 / 60Hz, 24-30VDC
AC (resistive load) Rated output current 1 A / 230VAC
Nominal output DC (resistive load) Current 1 A / 30 V DC
Output power of the AC circuit (resistive load): 230W (230 VAC)
Output of DC power circuit (resistive load): 24W (24VDC)
Accuracy of energy measurement: 2W +/-
Radio transmission frequency: 868.42MHz, Z-Wave EU
Range: up to 30 m in buildings (depending on the material that surrounds it)
Digital measurement temperature sensor range (sold separately Sensor): -50 ~ 125 ° C
Operating temperature: -10 ~ 40 ° C
IP protection: IP20
Dimensions (W x H x D) 18 x 93 x 58 mm
Certificates: CE, RoHS
Regulator module or dimmer Z-Wave + QUBINO DIN Dimmer for mounting in electrical panel by DIN rail with consumption measurement.