Danfoss' Living Connect® Z is a...
Danfoss' Living Connect® Z is a thermostat or radiator thermostatic head, wireless and electronically controlled by Z-Wave programmable radio signals. It is very easy to install and is supplied with adapters for all thermostatic valves manufactured by Danfoss and most manufacturers of thermostatic radiator valves.
Warning: Last items in stock!
|Technology||Z-Wave (Comp. con Z-Wave)|
With our wireless radiator thermostat your home will be even more comfortable. Thanks to the Z-Wave technology, the desired temperature can be easily and easily adjusted through a wireless switch, heating plan, automation automation scene or from the outside through a smartphone. You can also control the thermostat traditionally using the local buttons.
In addition to direct temperature control, the modern design Popp radiator thermostat has special heating modes such as frost protection or energy saving mode. A small LCD screen on the device shows the target or target temperature on request. The device has an internal programmer, which allows to define up to 9 adjustment points for a maximum of 7 days a week. Once programmed, these set points will be activated without further manual or wireless interaction.
Other intelligent functions are the detection of open windows, linking it with the appropriate Z-Wave sensor to the energy saving mode or the valve training function to ensure that the valves are still operational after long periods of inactivity. The device needs a Z-Wave wireless connection to a Z-Wave home automation controller to update the time and exchange status messages.
It is an interesting advantage over other similar heads, that the device reports the detected ambient temperature and calculated by the temperature sensor of the device, which is something that is missing in the functionality of other similar devices.
This head is a thermostat for radiator thermostatic valve controlled electronically by Z-Wave.
It is very easy to install and is supplied with adapters for all thermostatic valves manufactured by Danfoss and most manufacturers of radiator valves.
It is battery powered, compact and very easy to operate with only three buttons on the front.
In addition, the temperature can be adjusted wirelessly to a specific reference point. The device has an internal programmer that allows you to configure up to 9 different setpoint temperatures for each day of the week. This means that the energy saving is achieved even when the control unit is disconnected or does not work. The buttons on the device always overwrite the programmed settings. It has a function called "open window", which closes the valve if the temperature of the room drops drastically.
Delivery includes: 3x 1 thermostat, 3 x 1 adapter for RA valves and 3 x 1 adapter for M30x1, 5 (K) valves, 3 x 2 AA alkaline batteries, 3 x 1 2 mm Allen key
Radiator thermostat or Z-Wave thermostatic head for water radiator adaptable to thermostatic / thermostatic valves of Danfoss and Emmeti type directly. Also to Orkli, Arco and Baxi / Roca, etc. by adapter. Move to smart valves.