Viewed products





Confianza Online


HANK 1-Button Z-Wave + Scene Controller

HKZW-SCN01

New

Hank's Z-Wave + network scene controller is a wireless, portable and rechargeable device. This is the version of 1 single button.

More details

Out of stock

29,95 €

Technical characteristics

Technology Z-Wave Plus

More info

Z-Wave + 1-button scene controller


The Hank Z-Wave + scene controller is a wireless, portable and rechargeable device. You can control a Z-Wave device, such as a smart plug or smart dimmer after being included in a Z-Wave controller. You can also use it to activate a scene.

Although you only have one button, you can perform 3 actions according to the type of press: short press, sustained press, free press.

When operating with a rechargeable battery it offers a duration of operation of between 3 to 6 months. It is very easy to recharge it by connecting a USB cable to its micro-USB port. It is not necessary to change the batteries! In addition, this scene controller is equipped with a small buzzer that will alert us when the battery is low (less than 20%) or when communication has failed.

It has an RGB LED to give us visual information. This scene controller is also equipped with the Z-Wave range test function.

You need a Z-Wave controller (home automation center, dongle ...) to integrate this module into your network if you already have an existing network.

The Hank 1-button scene controller is a "general switch" powered by a rechargeable battery. It allows you to control multiple devices within a network by simply pressing the button. It is programmable so that you can always program it according to your needs.

FUNCTIONS:

Z-Wave + scene controller
Control up to 3 devices / scenes
Z-Wave range test function
Rechargeable battery
Low battery warning and communication error (through the buzzer)
Security of radio communication through AES-128 encryption
Integrates the chip of the Z-Wave 500 series
Firmware updates by air (OTA)
Ease of use and installation

TECHNICAL CHARACTERISTICS:

Module type: Transmitter of the Z-Wave + 500 series
Power supply: rechargeable battery 3.6V LIR2450
Standby power consumption: 3uA
Operating power consumption: 36mA
Frequency: 868.42 Mhz
Transmission distance: 100 m in free field, 30 m in indoor
Dimensions: 50 x 50 x16 mm
Operating temperature: 0 ° C to 40 ° C
Certifications: FCC, CE, Z-Wave
Z-Wave certification number: ZC10-16075153

Extended Z-Wave info

Name: Scene Controller
Manufacturer:Hank
Identifier:HKZW-SCN01
Z-Wave Certification Number:ZC10-16085175
Hardware Plattform:ZM5101
FLiRS:NO
Role Type:Portable Slave
Short Description:The Scene Controller is a wireless, portable and rechargeable scene switch. It can control a Z-Wave device, such as smart plug, smart dimmer with a Z-Wave gateway.
Description:The Scene Controller is a wireless, portable and rechargeable scene switch. It can control a Z-Wave device, such as smart plug, smart dimmer with a Z-Wave gateway. You can also activate a scene like sleep scene, movie scene and entertainment scene with it.

Manual download HERE.

Group
Max Nodes
Description
1
5
Scene Controller will send Scene Controller sends the central scene notification command and battery report command to the associated nodes.
2
5
Scene Controller will send Basic Set command to the associated nodes.
3
5
Scene Controller will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes.
Number
Size (Bytes)
Default Value
Name
Description
254
1
0
Enable/disable the configuration command
Lock/unlock all configuration parameters.
255
4
0
Reset Scene Controller
Reset Scene Controller and remove from the Z-Wave network
Basic
COMMAND_CLASS_BASIC
Battery
COMMAND_CLASS_BATTERY
Central Scene V2
COMMAND_CLASS_CENTRAL_SCENE_V2
Switch Multilevel V2
COMMAND_CLASS_SWITCH_MULTILEVEL_V2
Controller Exclusion
To remove the Scene Controller from the Z-Wave network:

(1) Insert the LIR2450 battery.

(2) Set the Z-Wave network main controller into remove mode

(see Z-Wave controller operating manual).

(3) Triple click the Z-button, if the exclusion is successful, LED

will blink in orange for less than 5 seconds and then keep on

for 3 seconds.





Controller Inclusion
Included as non-secure device:

1. Insert the LIR2450 battery.

2. Set the Z-Wave network main controller into learning mode( see Z-Waave network controller operating manul).

3. Triple click the Z-button.

4. If the inclusion is successful, the LED will blink in blue less than for 5 seconds and then keep on for 15 seconds.



Included as a secure device:

1. Insert the LIR2450 battery.

2. Set the Z-Wave network main controller into learning mode( see Z-Wave network controller operating manual).

3. Pressing and holding the Z-button for 3 seconds.

4. If the inclusion is successful, the LED will blink in green less than for 5 seconds and then keep on for 15 seconds.



Device Wake-Up
Pressing and holding Z-Button for 3 seconds. Led will turn to green,

which means Scene Controller has been woken up.
Factory Reset
Pressing and holding the Z-button for 20 seconds. Release the button after 20 seconds, LED will keep in yellow for 3 seconds. Scene Controller will be reset to factory defaults if you short press the button within this 3 seconds.

Using this procedure only in the event that the network primary controller is missing or otherwise inoperable.
Battery Quantity
Enter the number of batteries of the designated type that the product uses.
Battery Type
Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.
Z-Wave Scene Type
Indicates which of the two types of Z-Wave scene command classes are supported. Scenes or Central Scene

 

Reviews

Write a review

HANK 1-Button Z-Wave + Scene Controller

HANK 1-Button Z-Wave + Scene Controller

Hank's Z-Wave + network scene controller is a wireless, portable and rechargeable device. This is the version of 1 single button.

20 other products in the same category:

Customers who bought this product also bought: