Viewed products





Confianza Online


Remote control 4 buttons Aeotec Gen5 Z-Wave Plus

AEO_ZW088-ZWEU

New

Aeotec / Aeon Labs Z-Wave Plus 4-button controller, which allows you to control scenes and modules from 100 meters away. This Z-Wave Plus remote control offers a small size in the form of a key ring.
It is necessary to have a Z-Wave Control Unit to work if we want to operate domotic scenes.

More details

Out of stock

59,00 €

Technical characteristics

Technology Z-Wave Plus

More info

With this four-button keychain you will be able to control all kinds of Z-Wave devices and activate your predefined scenes in a home automation controller or Z-Wave Control Unit . It can be used in five different ways :

The keychain remote control Z-wave Aeon Labs, modern and nice design, has 4 buttons that control the control of all kinds of Z-Wave devices, such as lamps, blinds, perisanas, etc.

You can assign a different function to each button: turn off all lights when leaving home, disconnect certain plugs, set up the alarm system, etc. This remote control in the form of a keychain that incorporates the new Z-Wave Plus technology (much more efficient, faster and with less energy expenditure) is made possible by this remote control in the form of a key ring.

With its reduced dimensions, it can be stored easily in your pocket. Easy to use and very elegant, it can be used as a key ring thanks to its ring, and use it to leave or when entering the house.
Each button will allow us to control 2 devices, as it distinguishes between short or long pulses. This command can be used as the primary or secondary controller.
And because the keyfob Gen5 Keyfob from Aeonlabs is part of the Aeotec Gen5 range, it exceeds in performance everything that existed before. It uses the Z-Wave 500 series technology, offering an increase in the range of Z-Wave radio signals of 50% and a speed of communication 250% faster than previous Z-Wave products.

FUNCTIONS:

Remote control type keychain
Primary or secondary home controller
Ultra-compact design
4 configurable buttons
Manages 8 devices / scenes
Protective cover
It is part of the Gen5 range of Aeon Labs
Secure radio communication with AES-128
Integrates the Z-Wave 500 series technology
250% faster communication compared to standard Z-Wave devices
Optimization of l'antenne, portée 100 mètres
Easy to use and install


TECHNICAL CHARACTERISTICS :


Module type: Z-Wave Emitter
Power supply: 1 lithium battery 3V CR2450
Duration of the life of the batteria: 1 year
Frequency: 868.42 MHz
Transmission distance: 100m in open field
Usage temperature: -10 ° C to 50 ° C
Dimensions: 55 x 30 x 13 mm. (L xaxh)

Extended Z-Wave info

Name: Key Fob Gen5
Manufacturer:Aeotec
Identifier:ZW088-C
Z-Wave Certification Number:ZC10-14120007
Hardware Plattform:ZM5202
FLiRS:NO
Role Type:Portable Controller
Short Description:Key Fob Gen5 is a fully functional Z-wave remote controller, which can include, exclude and control the other Z-Wave certified devices.
Description:Key Fob Gen5 is a fully functional Z-wave remote controller, which can include, exclude and control the other Z-Wave certified devices. It also can be acted a secondary controller in a network. It is a four buttons design. You can use each button to control your home’s Z-Wave devices and build a Z-Wave network for them. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.

Manual download HERE.

Group
Max Nodes
Description
1
5
Group 1 is assigned to the Lifeline association group and every device has 5 nodes to associate. When the Key Fob is in Scene Mode, pressing the control button, which will send the corresponding Scene id to the associated nodes.
Number
Size (Bytes)
Default Value
Name
Description
250
1
0
Switching Group mode or Scene mode.
This parameter is used to configure that the current mode is Group Mode or Scene Mode. (0== Group Mode, 1== Scene Mode).
255
1
0
Reset the configuration parameter to default factory setting
This parameter is used to reset all configuration parameter to default factory setting.
Basic
COMMAND_CLASS_BASIC
Scene Activation
COMMAND_CLASS_SCENE_ACTIVATION
Switch Multilevel
COMMAND_CLASS_SWITCH_MULTILEVEL
Wake Up
COMMAND_CLASS_WAKE_UP
Controller Exclusion
Short press the “Exclude” button on the Key Fob, it will go into exclusion state and its red LED will blink slowly to wait excluding other slave Z-Wave devices from its network.
Controller Inclusion
Short press the “Include” button on the Key Fob, it will go into inclusion state and its blue LED will blink slowly to wait including other slave Z-Wave devices.
Learn Mode (adding another controller)
Short press the “Learn” button on the back of the Key Fob.
Factory Reset
Use this procedure only in the event that the primary controller is missing or otherwise inoperable.

Press and hold the “Mode” button and “Learn” button for 20 seconds and then release.
Device Wake-Up
Press and hold the ""Learn"" for 3 seconds will trigger sending the Wake up notification command.
Additional Special Features
It can also activate 8 Z-Wave Scenes.

 

Reviews

Write a review

Remote control 4 buttons Aeotec Gen5 Z-Wave Plus

Remote control 4 buttons Aeotec Gen5 Z-Wave Plus

Aeotec / Aeon Labs Z-Wave Plus 4-button controller, which allows you to control scenes and modules from 100 meters away. This Z-Wave Plus remote control offers a small size in the form of a key ring.
It is necessary to have a Z-Wave Control Unit to work if we want to operate domotic scenes.

20 other products in the same category:

Customers who bought this product also bought: