Self-contained biometric reader ANVIZ...
Self-contained biometric reader ANVIZ of fingerprints and RFID. Supports up to 2000 recordings / 100,000 records
TCP / IP, RS485, miniUSB, Wiegand 26. Controller SC011 included. Suitable for anti-vandalism exterior
Warning: Last items in stock!
Autonomous reader based on fingerprints, EM RFID proximity cards (125KHz) or both combined systems. With capacity of up to 2000 fingerprint or card recordings and up to 100,000 records.
Resistant optical sensor of new generation footprint encapsulated and sealed. It has a powerful Texas Instruments Stellaris® 32-Bit processor and incorporates the BioNano algorithm that allows fast and reliable reading of dry, wet and cracked prints, as well as the intelligent and progressive improvement of the footprint information with each new reading. Compatible with standard EM RFID proximity cards. Enrollment of cards through master cards (included) or through the included management software.
Communication with PC through TCP / IP, RS485 and miniUSB Plug & Play port. Output with Wiegand security encryption 26/34. Tamper with alarm output.
It includes an independent access controller SC011 that receives the data from the reader itself through ANVIZ Wiegand, converting the whole into a stand-alone device. It provides the system with an input for door sensor, an input for opening button and NO / NC relay output for direct control of locks. The controller needs DC 12 V power, which in turn feeds the reader.
IK10 anti-vandalism metal housing, suitable for outdoor, IP65 protocol. Compact and elegant design that allows installation in frames. Multicolor LED and acoustic notifications of device status. Complete user management software and access included for free.
|Processor||TI Stellaris® 32-Bit high speed|
|Optical fingerprints sensor||AFOS300 encapsulated|
|Activation sensor||Infrared auto-activation|
|Scanning area||22 x 18 mm|
|Identification time||<1 Sec|
|Capacity||Up to 2000 fingerprints or cards|
|Records||Up to 100000|
|Identification modes||Footprint, Card and Footprint + Card|
|Proximity card||EM RFID (125KHz)|
|PC communication||TCP / IP, RS485, miniUSB|
|Departures||Wiegand 26/34, Alarm output Tamper|
|Controller inputs||ANVIZ Wiegand, Opening pushbutton|
|Controller outputs||Relay NO / NC|
|Feeding||DC 12 V / 120 mA|
|Temp. functioning||-20º C ~ + 50º C|
|Dimensions||35 (Fo) x 50 (W) x 124 (H) mm|
- M5 biometric reader
- Controller SC011
- 4 studs and 4 mounting screws
- Connection cables
- Enrollment, deletion and user cards (x2)
- CD with manual and software