PoE Switches

Manufacturers

Viewed products





Confianza Online


IP-COM F1110P-8-102W switch 8 ports PoE non-manageable desktop format

F1110P

New

8 port 10/100 PoE switch plus 2 Gigabit link. Supports up to 250 meters. with PoE power.

More details

In Stock

91,00 €

Technical characteristics

PoE Si (Power Over Ethernet)

More info

Switch 8 ports PoE IP-COM F1110P-8-102W is an 8-port 10 / 100Mbps PoE switch + 2 Gigabit desktop ports developed by IP-COM. Provides 8 ports 10/100 BASE-TX RJ45 and 2 ports RJ45 BASE-T 10/100/1000. Ports 1-8 support IEEE 802.3at PoE standard with each port providing 15.4W power, or support IEEE 802.3af PoE + standard with each port providing 30W power. The entire device can provide power of up to 99W. Through the use of twisted pairs CAT5, it can provide power and data transmission to APs, IP cameras, IP telephones, etc. In addition, all the ports support the protection against transmission of data of 6kV and long distance and power of 250m, which reduces the difficulty of implementation and thus decreases the cost.
Switch with 8 ports 10/100 Mbps POE 99 W + 2 10/100/1000 Mbps desktop
8 RJ45 ports 10/100 Mbps. POE 802.3af / at up to 99W + 2 RJ34 10/100/1000 Mbps
Possibility of VLAN by means of a switch
Up to 250 Mts of cable distance using Cat5e

characteristics

The IP-COM F1110P Switch has 8 ports 10/100 Mbps PoE AF / AT. The link ports (9 and 10) are also Gigabit. This switch is equipped with an overload protection circuit of 6KV.

It also has a switch for the automatic configuration of VLAN groups, being able to isolate the POE ports from each other, communicating with the rest of the network only through the link ports (9 and 10), being able to isolate the network from cumbersome storms of traffic. Finally, note that you can work in expanded mode, making the wiring distance of ports 1-4 reach up to 250 meters. away.

Technical characteristics / specifications

Supported standards

IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at

Ports:

8 RJ45 ports 10/100 Mbps. Auto MDI / MDI-X all POE.

2 RJ45 ports 10/100/1000 Mbps. Auto MDI / MDI-X. Uplink

4K memory for MAC addresses.

Backplane bandwidth 5.6 Gbps.

Transmission method Store and Forward.

LED'S: Power, POE, Link / ACT, POE Max, 1000 Mbps.

Operating modes:

Default : All ports communicate with each other
VLAN: Ports 1-8 isolated, can only communicate with 9 and 10
Extend : Ports 1-4 reduce speed 10 Mbps and increase POE distance up to 250 meters.

POE specifications:

  Supports POE 802.3af / at standard up to 30 W per port

  Automatic detection of consumption in each port.

  Protection of circuits to prevent interference between ports connected up to 6 kV.

Maximum power POE power: 99W.

Dimensions: 177 x 104x 26 mm., Desktop format

Working temperature: 0 to 40 ° C.

Storage temperature: -40 to 70 ° C.

Moisture of work and storage: 10 to 95% nc.

Weight: 1.8 Kg.

Internal power supply 100-240 DC 51V DC, 2.1A, maximum consumption 102 W

Security / EMI: Meets FCC, CE, RoHS standard

Specifications

  • Ethernet: 10/100
  • Ethernet ports: 8 + 2 giga
  • Format: desktop
  • MANAGEMENT: NON-GESTIONABLE

Reviews

Write a review

IP-COM F1110P-8-102W switch 8 ports PoE non-manageable desktop format

IP-COM F1110P-8-102W switch 8 ports PoE non-manageable desktop format

8 port 10/100 PoE switch plus 2 Gigabit link. Supports up to 250 meters. with PoE power.

11 other products in the same category:

Customers who bought this product also bought: