PoE Switches

Manufacturers

Viewed products





Confianza Online


IP-COM SS3300-10-PWR-M PoE managed switch 8 Fast Ethernet and 2 Gigabit / SFP ports (Combo)

SS3300-10-PWR-M

New

Switch 8 ports 10/100 Mbps. All PoE (Full Power: 123 W) + 2 combo RJ45 / SFP ports manageable. Ideal for connecting and feeding IP cameras, IP phones and compatible POE Access Points using RJ45 cable. Management via Web and possibility of updating Firmware.

More details

In Stock

128,00 €

Technical characteristics

PoE Si (Power Over Ethernet)

More info

The 8-port PoE IP-COM S3300-10-PWR-M switch is an 8-port 10 / 100Mbps PoE switch + 2 Gigabit TP / SFP Combo Smart Web ports developed by IP-COM. Provides 8 ports 10 / 100Base-TX RJ45, 2 ports RJ45 10/100 / 1000Base-T and 2 combos 1000Base-X SFP.
Ports 1-8 support IEEE 802.3af PoE (15.4W) and IEEE 802.3at PoE + (30W). All PoE output is 123W. Through the use of Cat 5 twisted pair, the device can provide data and power for APs, IP cameras, IP phones and other PoE devices. In addition, when using Cat 5e Ethernet and activate the extension mode, the data transmission distance and power can be up to 250 meters. In addition, it supports QVLAN, link aggregation, QoS, MAC link, etc., which greatly saves the cost, time and energy of network deployment.

PoE Switch IP-COM

Technical characteristics / specifications

Supported standards

IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1D, IEEE 802.3af, IEEE 802.3at

Ports

10 RJ45 10/100 Mbps (Half-Duplex), 20/200 Mbps (Full-Duplex)

2 RJ45 10/100/1000 Mbps (Half-Duplex) or Gigabit SFP Slot (When used to choke Gigabit ports)

Transmission method

Store and Forward

Protocol

CSMA / CD

MAC address table

4 K

Switching capacity

5.6 Gbps backplane

LED indicators

System: Power, Maximum power POE (55W)

Per port: Link / Activity, Speed and State POE (Ports 1 to 24)

Characteristic feeding POE

Up to 30 W of consumption per PoE port

Maximum consumption allowed for all active POE ports: 250 W

Identity Classification PD

Manual configuration to limit consumption in PoE port

Supports Priority PoE configuration

PoE port protection against overvoltage> 6KV

PoE port protection against short circuit

PoE port protection against overvoltage

PoE power on RJ.45, pin 3.6 for (+) and pin 1.2 for (-)

Link Agregation

Supports up to 3 static groups with 4-port support.

STP (Spaning Tree Protocol)

Supports STP / RSTP VLAN

Supports up to 18 VLAN ID port VLAN

Supports up to 31 VLAN ID 802.1Q VLAN

IGMP Snooping

Supports IGMP (v1 / v2) Snooping

Mirroring of ports

1 mirroring port

QoS

Supports flow control

Supports 802.1p and DSC highlighted priority

Queue planning with flexible algorithms about port, queue.

Supports SP and WRR

Security

Supports MAC-Port Brinding

Management and Maintenance

Supports update via web browser

Supports SNMP v1 / v2

Power supply

Internal 100V 240 VAC50 / 60Hz

Total consumption with active POE ports: less than 150W

Temperature

Operation: 0 ~ 40 room temperature

Storage: -40 ~ 70 room temperature

Humidity

Operation: 10% ~ 90% (not condensed)

Storage: 5% ~ 90% (not condensed)

Weight

4800 g

Dimensions

294x 179 x 44 mm

MTBFe100,000 hours

Certificates

CE Class A

FCC Class A Part 15

RoHS

Specifications

  • Ethernet: 10/100
  • Ethernet ports: 8 + 2sfp
  • Format: rack 13
  • MANAGEMENT: SNMP

Reviews

Write a review

IP-COM SS3300-10-PWR-M PoE managed switch 8 Fast Ethernet and 2 Gigabit / SFP ports (Combo)

IP-COM SS3300-10-PWR-M PoE managed switch 8 Fast Ethernet and 2 Gigabit / SFP ports (Combo)

Switch 8 ports 10/100 Mbps. All PoE (Full Power: 123 W) + 2 combo RJ45 / SFP ports manageable. Ideal for connecting and feeding IP cameras, IP phones and compatible POE Access Points using RJ45 cable. Management via Web and possibility of updating Firmware.

11 other products in the same category: