Switch 8 ports 10/100 Mbps. All PoE...
Switch 8 ports 10/100 Mbps. All PoE (Full Power: 123 W) + 2 combo RJ45 / SFP ports manageable. Ideal for connecting and feeding IP cameras, IP phones and compatible POE Access Points using RJ45 cable. Management via Web and possibility of updating Firmware.
Warning: Last items in stock!
Out of stock
|PoE||Si (Power Over Ethernet)|
The 8-port PoE IP-COM S3300-10-PWR-M switch is an 8-port 10 / 100Mbps PoE switch + 2 Gigabit TP / SFP Combo Smart Web ports developed by IP-COM. Provides 8 ports 10 / 100Base-TX RJ45, 2 ports RJ45 10/100 / 1000Base-T and 2 combos 1000Base-X SFP.
Ports 1-8 support IEEE 802.3af PoE (15.4W) and IEEE 802.3at PoE + (30W). All PoE output is 123W. Through the use of Cat 5 twisted pair, the device can provide data and power for APs, IP cameras, IP phones and other PoE devices. In addition, when using Cat 5e Ethernet and activate the extension mode, the data transmission distance and power can be up to 250 meters. In addition, it supports QVLAN, link aggregation, QoS, MAC link, etc., which greatly saves the cost, time and energy of network deployment.
Technical characteristics / specifications
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1D, IEEE 802.3af, IEEE 802.3at
10 RJ45 10/100 Mbps (Half-Duplex), 20/200 Mbps (Full-Duplex)
2 RJ45 10/100/1000 Mbps (Half-Duplex) or Gigabit SFP Slot (When used to choke Gigabit ports)
Store and Forward
CSMA / CD
MAC address table
5.6 Gbps backplane
System: Power, Maximum power POE (55W)
Per port: Link / Activity, Speed and State POE (Ports 1 to 24)
Characteristic feeding POE
Up to 30 W of consumption per PoE port
Maximum consumption allowed for all active POE ports: 250 W
Identity Classification PD
Manual configuration to limit consumption in PoE port
Supports Priority PoE configuration
PoE port protection against overvoltage> 6KV
PoE port protection against short circuit
PoE port protection against overvoltage
PoE power on RJ.45, pin 3.6 for (+) and pin 1.2 for (-)
Supports up to 3 static groups with 4-port support.
STP (Spaning Tree Protocol)
Supports STP / RSTP VLAN
Supports up to 18 VLAN ID port VLAN
Supports up to 31 VLAN ID 802.1Q VLAN
Supports IGMP (v1 / v2) Snooping
Mirroring of ports
1 mirroring port
Supports flow control
Supports 802.1p and DSC highlighted priority
Queue planning with flexible algorithms about port, queue.
Supports SP and WRR
Supports MAC-Port Brinding
Management and Maintenance
Supports update via web browser
Supports SNMP v1 / v2
Internal 100V 240 VAC50 / 60Hz
Total consumption with active POE ports: less than 150W
Operation: 0 ~ 40 room temperature
Storage: -40 ~ 70 room temperature
Operation: 10% ~ 90% (not condensed)
Storage: 5% ~ 90% (not condensed)
294x 179 x 44 mm
CE Class A
FCC Class A Part 15