No products
Prices are tax included
WI-PS510V
New
In Stock
PoE | Si (Power Over Ethernet) |
The Wi-Tek WI-PS510V Switch is a Power Over Ethernet device that allows power transmission using RJ45 CAT5 data cable, at a distance of up to 250 meters. With this, we will be able to power IP equipment without the need for a power adapter in its closest environment, facilitating installations of outdoor devices or devices that are difficult to access such as false ceilings and roofs. Finally, it should be noted that this switch supports priority per port and quality of service (QoS) for better transmission in case of use for IP telephony (VoIP).
Technical characteristics / specifications
Supported standards IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3af POE IEEE 802.3at POE IEEE 802.3x Ports 8 10/100 Mbps Switch RJ-45 AUTO MDI / MDI-X PoE ports 2 Switch ports 10/100/1000 Mbps RJ-45 AUTO MDI / MDI-X LED indicators System: Power, VLAN / Extended Mode / SFP Port By RJ45 port: Link / Activity and POE Enabled PoE maximum output power 65 W Maximum POE ports Port 1-8: 802.3af / at compliant up to 30W PoE Pin 4.5 + and 7.8 - Exchange capacity 2 Gbps Packet Forwarding Rate 1.5 Mbps MAC address table 4K P acket Buffer Memory 768 Kbps | Jumbo Frames 10240 Bytes Functional Switch In the default position all ports work as a standard switch. In the VLAN position it isolates the POE ports from collisions, they only communicate through the UPLink ports. In the Extend position the POE ports increase the transmission distance to 250 meters. Fan No fans Feeding Includes Internal 100 ~ 265V / AC, 50 ~ 60Hz power supply Temperature Operation: -10 ~ 55 ambient temperature; Storage: -40 ~ 70 ambient temperature Humidity Operation: 10% ~ 90% (non-condensing); Storage: 5% ~ 90% (non-condensing) Weight 850 g Dimensions 197x75x32 mm Certificates CE, FCC, RoHS |