Prices are tax included
Gigabit POE Switch with Engenius...
Warning: Last items in stock!
|PoE||Si (Power Over Ethernet)|
Gigabit POE Switch with Engenius Neutron Series Wireless Controller
24 LAN ports 10/100/1000 Mbps, all POE 802.3 af / at up to 410W
Includes 4 Gigabit SFP ports (Modules not included)
Manageable SNMP, allows control of up to 50 AP of the Neutron series locally
The Engenius EWS1200-28TFP PoE-Controller Switch is a device that allows local management and configuration of up to 50 Neutron series equipment from the same manufacturer. It has 24 ports Gigabit POE 802.3af and 4 slot for Fiber Optic SFP modules, the modules are not included.
It should be noted that the EWS1200-28TFP is fully manageable by the free ezMaster software from Engenius, and can be remotely accessible to it.
Technical characteristics / specifications
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1D, IEEE 802.3af
Data transfer ratio
10/100/1000 Mbps (Half-Duplex), 20/200/2000 Mbps (Full-Duplex)
Store and Forward
24 ports Switch 10/100/1000 Mbps RJ-45, Auto MDI / MDI-X and POE 802.3 af, up to 30W per port / 410W total
4 ports mini GBIC ports for crimping SFP modules
MAC address table
8K, 8,000 MAC addresses
256 MB SDRAM; 32 MB Flash Memory
56 Gbps backplane
System: Power, Fault, Maximum POE Power, LAN Mode and POE Mode
Per port: Link / Activity, Speed and State POE (Ports 1 to 24)
By SFP port: Link / Activity and Speed
Characteristic feeding POE
Up to 30 W of consumption per PoE port
Maximum consumption allowed for all active POE ports: 410 W
Operation: 0 ~ 50 ambient temperature
Storage: -20 ~ 70 ambient temperature
Operation: 5% ~ 95% (not condensed)
Storage: 5% ~ 95% (not condensed)
802.3ad, 802.1D, 802.1w, 802.1s, 802.1ab, 802.1Q, 802.1p, 802.1X
SNMP management v1 / v2c / v3