The RaZberry 2 unit converts each...
The RaZberry 2 unit converts each Raspberry PI into a gateway or control unit for home automation with Z-Wave Plus technology. RaZberry is a GPIO adapter for RaspberryPi. Enter the Z-Wave domotica with Raspberry. It is compatible with Raspberry PI model B, model B + and Raspberry PI 2.
Warning: Last items in stock!
But if the Z-Way configuration interface included in the device does not satisfy us or we do not know or want to program our own application we can always use free software developed by third parties such as those listed below:
At the same time there are apps for your smartphone or tablet of which we highlight:
The system is based on the Z-Wave Plus chip from Sigma Designs and has a built-in antenna directly on the PCB board. Two LEDs (red and green) are used to communicate information to the user such as data transmission or the inclusion / exclusion status of the controller in the Z-Wave network.
Compatible with virtually all Raspberry models, even old ones, as well as including Model B + and "Raspi" 2 and 3
The RaZberry2 card consists of four parts:
The Raspberry PI, needs to be ordered separately, that is, as is to be expected, it is NOT included with the GPIO RaZberry card.