Manage your home automation locally,...
Manage your home automation locally, privately and without the need for the cloud. Aeotec's Z-Stick 7 allows you to create your own automation gateway using Z-Wave Gen7 technologies (700 series).
Warning: Last items in stock!
|Technology||Z-Wave 700 Series|
The Z-Stick 7 is the most powerful USB Z-Wave antenna available today. It is based on Aeotec's Z-Stick technology and Silicon Labs 700 series Z-Wave / Z-Wave Plus V2 automation stack. Aeotec's new but proven embedded technology is already powering more than 300,000 devices automation and smart home worldwide. Now an even better version can boost your solution.
The Z-Stick 7 is part of Aeotec's "turnkey" hardware portfolio, designed so that solution providers can create automation solutions without the need to develop custom hardware.
Packed with new features and technology, but totally smaller. The Z-Stick 7 is 79% smaller than the Z-Stick Gen5 + and yet it is still as easy to install as ever.
Your smart home is a safe home with the Z-Stick 7. Wireless communication between your Z-Wave antenna and the Z-Wave products in your home is protected with the three-layer security of S2 security.
Install new devices in seconds. The Z-Stick 7 offers SmartStart technology natively, allowing newer Z-Wave devices to connect to your system simply by scanning their QR code through a SmartStart-enabled app.
If it is not hosted locally, the security and privacy of your automation system may be at risk. Take control of both using open source hardware like a Raspberry Pi and Z-Stick 7 compatible software to host and control your automation setup locally.
If the cloud goes down, so do most automation systems. Z-Stick 7 lets you bypass cloud processing and control, providing local processing and helping to avoid downtime due to internet and cloud outages.
Z-Wave 700 USB Controller
Create your own Z-Wave home automation box
Uses 700 series chipset
Integrates Smart and S2 technologies
Use Z-Wave library 7.11.0 or later
TECHNICAL SPECIFICATIONS :
Module type: Z-Wave + V2 controller
Z-Wave chipset: ZGM130
Power: USB DC 4.75V to 5.25V
Maximum operating current: 40mA
Frequency: 868.42 Mhz
Range: up to 150m outdoors, up to 70m in buildings
Dimensions: 37 x 28 x 8.5 mm
Weight: 3.5 grams