Ideal for sports facilities, airports...
Product Under Order
Warning: Last items in stock!
Engenius EWS850AP Engenius Access Point WIFI 2.4 / 5 GHz 1774 Mbps
Outdoor Access Point IP67 compatible 802.11a / ac / ax / b / g / n
1 10/100/1000 Mbps LAN port, POE 802.3at compatible (injector included)
Includes pole or wall mount anchors
Up to 1201 Mbps in the 5 GHz band and 574 Mbps in the 2.4 GHz band with 4 detachable external 5 dBi omnidirectional antennas
Managed operating modes: AP, Mesh
Stand alone operation modes: AP, Client Bridge, Mesh, WDS
Surge protection: 1KV
EDS protection: 4KV per contact, 8KV overhead
Manageable through free ezMaster software, through Engenius EWS series switches or by SKYKEYI
LLTW Warranty (Limited Life Time Warranty)
EWS850AP is EnGenius' first outdoor Wi-Fi 6 solution. Built-in ultra-speed 802.11ax access point with OFDMA and MU-MIMO technology for high-density use in multiple applications.
Concurrent dual 802.11ax architecture and compatible with wave 2 / ac / a / b / g / n client devices.
360 ° omnidirectional antennas for complete coverage of network client devices in a ubiquitous environment.
Compliant with proprietary 48V PoE input for flexible installation and deploying a remote reset / reboot access point up to 100 meters (328 feet).
Rugged housing with IP67 enclosure rated for deployment in extreme weather conditions.
Systemic and distributed management via EnGenius ezMaster, Skykey controller, and EWS management switch without the need for licenses or subscription fees.
802.11ax and ac / a / b / g / n compliance
2.4 GHz: Two (2) detachable 5.0 dBi SMA antennas
5 GHz: Two (2) detachable 5.0 dBi SMA antennas
The alternative solution to compatibility with the SA2216 and SA5219 sector antennas
One (1) 10/100/1000 BASE-T RJ-45 Ethernet ports
4 x SMA connector interfaces
Wireless transmission status and display system
Maximum power consumption
802.3af / at Source of compliance
Active Ethernet (Power Over Ethernet, PoE)
Radio and wireless specifications
Access point type
Outdoor, IP67, concurrent dual radios, 5 GHz 802.11ax 2 × 2 MU-MIMO supports 802.11 ac / a / n mode, 2.4 GHz 802.11 ax 2 × 2 MU-MIMO supports 802.11 b / g / n.
Two (2) SU-MIMO spatial streams for 2.4 GHz and two (2) SU-MIMO spatial streams for 5 GHz up to a total wireless data rate of 1,774 Mbps to a single 11-axis wireless client device under radius of 2 , 4 GHz and 5 GHz.
Two (2) spatial multi-user (MU) -MIMO streams for a wireless data rate of up to 1201 Mbps to transmit to one (1) two MU-MIMO 11ax capable streams of less than 5 GHz wireless client devices simultaneously.
Two (2) spatial multi-user (MU) -MIMO streams for a wireless data rate of up to 574 Mbps to transmit at one (1) two MU-MIMO 11ax capable streams of sub 2.4 GHz wireless client devices simultaneously.
2.4 GHz: 2400 MHz ~ 2482 MHz
5 GHz: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 ~ 5725 MHz, 5725 MHz ~ 5850 MHz
The radios and support channels will be varied in the configured regulatory domain.
Support radio technology
802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)
802.11b: Direct Sequence Spread Spectrum (DSSS)
802.11ac / a / g / n: Orthogonal Frequency Division Multiple (OFDM)
802.11ax supports very high performance (VHT) - HE 20/40/80 MHz
802.11ac supports very high performance (VHT) - VHT 20/40/80 MHz
802.11n supports high performance (HT) - HT 20/40 MHz
802.11n supports very high performance under 2.4GHz -VHT40 MHz (256-QAM) radio
802.11n / ac / ax packet aggregation: A-MPDU, A-SPDU
Type of modulation supported
802.11b: BPSK, QPSK, CCK
802.11a / g / n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
Transmission power (maximum value)
2.4 GHz: 23 dBm
5 GHz: 25 dBm
Maximum power is limited by regulatory domain
MU-MIMO allows multiple spatial streams to be assigned to different clients simultaneously on both download and upload sides.
Orthogonal Frequency Division Multiple Access (OFDMA) allows a single transmission to be divided by frequency within a channel.
Tx beamforming (TxBF)
Increasing the reliability of the signal and the transmission distance.
The BSS coloring marks different colors in each data, which will allow client devices to stop receiving a frame and return to sleep mode as soon as they recognize that these frames are not of interest to them.
Target activation time (TWT)
The target activation time feature allows your devices to keep a radio receiver asleep and wake it up when necessary to receive periodic transmissions from an access point. The result is significant energy savings for battery-powered devices.
Supported data rates (Mbps)
802.11b: 1, 2, 5.5, 11
802.11a / g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15)
802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2)
2.4 GHz: 9 to 574 (MCS0 to MCS11, NSS = 1 to 2)
5 GHz: 18 to 1201 (MCS0 to MCS11, NSS = 1 to 2)
ACK timeout (Distance control)
Set ACK timeout to ensure proper distance to deliver wireless signal properly
Scans the signal level of an environment to provide the parameters to realize the auto transmission power and the auto channel.
Automatic transmission power
Automatically adjust power level
Automatically assign a clear channel for RF transmission in a dominant environment.
Fast roaming (802.11k)
Collect the parameters of the Access Points in the neighborhood to find the optimal AP.
Fast roaming (802.11v)
Know the signal strength of the client devices under each one of them to direct these client devices to one of the Access Points if the signal level is lower than the default value of the AP systems.
Directs client devices to an appropriate frequency band to obtain more bandwidth and speed under an Access Point.
Kick client devices that signal (RSSI) is above the AP's set value to reduce interference and optimize connection quality.
Support from BSSID
It supports 8 SSIDs in both the 2.4 GHz and 5 GHz bands.
Isolate each customer to avoid unnecessary contact, filter sensitive data, and improve Internet security and reliability. The function will only be available in standalone mode.
Independent VLAN settings can be enabled
Issue VLAN-tag packets to find the destination and deliver the packets on the defined route. The functions enable a flexible and scalable network topology.
VLAN by SSID
Integrate the VLAN ID with an SSID interface to forward the packets through the defined route. Roles isolate client devices for added security.
The feature is activated with the specified VLAN ID, the device will only allow management access with the same specified VLAN ID from a remote location using protocols such as telnet, SSH, SNMP, Syslog, etc.
It controls the bandwidth bottle to offer the limited bandwidth for an individual SSID or each client per Access Point.
Provides a network monitoring tool for administrators to stay informed of the configuration change.
Save settings as default user
Save custom settings as default for different customer demands.
Perform a regular reboot on the access point at the assigned time
Perform to enable or disable the 2.4GHz or 5GHz interface in a period of time.
Supported by CLI
Help Operators Download 3G to Wi-Fi Smoothly
Wireless Client List
Provide the list to show the actual status of the wireless client devices on this Access Point.
This feature will allow client devices to discover the wireless access point in an environment and automatically exchange data to gain authorization to access the Internet when roaming between access points.
Environmental and physical
Operating: -20 ° C ~ 60 ° C (-4 ° F ~ 140 ° F)
Storage: -30 ° C ~ 80 ° C (-22 ° F ~ 176 ° F)
Operand: 0% ^ 90% typical
Storage: 0% ^ 90% typical
Environmental protection level
Dimensions and weight
EWS860AP device (without antennas)
Length: 7.48 "(190mm)
Width: 4.88 "(124 mm)
Depth: 1.85 (47mm)
Compliance with regulations
Subpart 15 B
Subpart C 15.247
Subpart E 15.407
EN 300 328
EN 301 893
EN 301 489