Viewed products





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es

QUBINO Smart Meter - Z-Wave electrical consumption measurement module for DIN rail

ZMNHTD1

New

Power consumption meter module Z-Wave Plus Qubino Smart Meter for DIN rail mounting of electrical panel. Calculate the energy, power and power factor of the measured signals among other values.

More details

In Stock

117,04 €

-12%

133,00 €

Technical characteristics

Technology Z-Wave Plus
Characteristic Consumption Measurement

More info

The world's most powerful Z-Wave intelligent electric consumption meter

The Qubino Smart Meter is an extremely versatile and powerful Z-Wave module for measuring energy consumption in a single-phase power grid of up to 65A. A built-in microprocessor calculates the energy, power and power factor of the measured signals. It is designed to be mounted on a DIN rail.

Qubino Smart Meter smart consumption meter

What is it for?

The Qubino Smart Meter module can be used in residential, industrial applications and by electrical operators. Measures energy directly in 2-wire networks by fast sampling of voltage and current signals. Calculate the energy, power and power factor of the measured signals. You can control the module through the Z-Wave network. It also acts as a repeater in order to improve the range and stability of the Z-Wave network. The smart meter is designed to be mounted on a DIN rail.

The simplest installation

There is no simpler installation than the DIN rail installation - and the Qubino Smart Meter is a module mounted on a DIN rail. Watch the video to learn more.

Note: Keep in mind that this module requires NEUTRAL to operate.

If you want to know more, you can also access this INTERESTING ARTICLE

The most proven and reliable Z-Wave modules

Qubino's Z-Wave modules are install-and-forget products. The Qubino products that we offer, are manufactured to last, so they only use electronic components that meet the most demanding levels of quality. Our modules are also the most tested Z-Wave micromodules on the market. The Slovenian Institute of Quality and Measurement (SIQ), an independent European entity, checks the quality of the actual parameters of our products, including temperature increases, manufacturing, insulation resistance, electrical consumption and overloads according to European standards of the highest quality according to the specification of standard EN 60669-2-1.

Additional parameters for professionals

The module for DIN rail Qubino Smart Meter   It has 23 additional parameters for its use by experts. Some of the most useful are:

  • Selection of the function of the input switch
  • Automatic start / stop of the external relay after the adjusted output
  • Reports in watts about the change of power or time intervals

Technical specifications and electrical diagrams:

Qubino Smart Meter Connection Diagram

Accessories for QUBINO Smart Meter

External Relays

The Qubino Smart Meter module can also control electrical loads (on / off) by adding an external relay-actuator:

- Bistable switch (32A) BICOM432-40-WM1, controlled by the optical communications (IR) port
- Switch (32A) IKA232-20 / 230 V controlled by the output in terminal 5

External modules

Technical specifications

Main terminals (LI, NI, Lo, No)
Contacts capacity: 1.5 & 16 (25) mm2
Connection screws: M5
Max torque: 3.5 Nm (PZ2)
Optional terminals (1,2,4,5)
Contact capacity: 0.05 & 1 (2.5) mm2
Screws: M3
Max torque: 0.6 Nm
Measuring input:
Type (connection): single phase (1b)
Reference current (Iref): 5 A
Maximum current (Imax): 65 A
Minimum current (Imin): 0.25 A
Starting current: 20 mA
Voltage (Un): 230 V (± 20%)
Power at Un: <2 W
Nominal frequency (fn): 50 and 60 Hz
Accuracy:
Active energy and power:
Standard EN 62053-21: class 1
Standard EN 50470-3: class B
Reactive energy:
Standard EN 62053-23: class 2
Optical communication:
Type: IR used to control BICOM432-40-IR
Input (1):
Rated voltage: 230 V (± 20%)
Input resistance: 450 kOhm
Safety:
Indoor Meter: And it is
Degree of pollution: 2
Protection class: II
AC voltage test: 4 kV
Installation Category: 300 VRMS Cat. III
Standard: EN 50470
Ambient conditions and EMC: Meets standards for indoor active energy meters. Temperature and climatic conditions to EN 62052-11
Ambient conditions and Safety: Meets standards for indoor active energy meters. Temperature and climatic conditions to EN 62052-11
Dust / water protection: IP20
Operating temperature: -10 & 40 ° C
Storage temperature: -40 & 70 ° C
Enclosure material: self-extinguishing
UL94 V compliant And it is
Indoor meter: And it is
Degree of pollution: 2
AC voltage test: 4 kV
Standard: EN 50470
Distance: up to 30 m indoors (depending on building materials)
Weight (with packaging): 150 g (170 g)
Frequency range: 868.4 MHz, Z-Wave
Installation Din rail 35 mm
Dimensions (WxHxD): 36 x 90 x 64 mm

* In the case of loads other than resistive loads, pay attention to the value of cosÆ and, if necessary, use a load lower than the nominal load. The maximum current for cosÆ = 0.4 is 3 A at 250 VAC, 3 A at 24 VDC L / R = 7 ms.

Meets CE and ROHS Certifications

CHARACTERISTICS: Measurement of global energy consumption or circuit Provides data of voltage, current, active, reactive and apparent power and power factor Z-Wave chip series 500 (Z-Wave +) is integrated 250% faster communication compared with standard Z-Wave devices The first DIN rail Z-Wave Module Worldwide Operating temperature -10 to 40 ° C optical communication port (IR) for the external relay BICOM432-40-WM1 Output for connecting an external contactor IKA232-20 / 230 V

Z-Wave Plus - Fibaro ZW5
Qubino Smart Meter - Medidor corriente recomendado

Download

Extended Z-Wave info

Name: Smart Meter
Manufacturer:QUBINO
Identifier:ZMNHTD1
Z-Wave Certification Number:ZC10-18086203
Hardware Plattform:ZM5202
FLiRS:NO
Role Type:Always On Slave
Short Description:The Qubino Smart Meter is an extremely versatile and powerful Z-Wave device for measuring energy in a single-phase electrical power network of up to 65A. A built-in microprocessor calculates energy, power and power factor from the measured signals. It is designed to be mounted on a DIN rail.
Description:The Qubino Smart Meter can be used in residential, industrial and utility applications. It measures energy directly in 2-wire networks by means of fast sampling of voltage and current signals. It calculates energy, power and power factor from the measured signals. You can control the device through the Z-Wave network. The Qubino Smart Meter can operate across a wide temperature range, from a chilly -15˚C to a scorching 55˚C (5˚F–131˚F). Every device also acts as a repeater in order to improve the range and stability of the Z-Wave network.

Manual download HERE.

Group
Max Nodes
Description
1
1
Z-Wave Plus Lifeline Supports the following command classes: • Device Reset Locally: triggered upon reset • Meter Report: triggered according to Configuration parameters no. 40 and 42.
Number
Size (Bytes)
Default Value
Name
Description
40
1
10
Reporting Watts on power change
• Default value 10 • 0 – reporting disabled • 1-100 = 1% - 100% reporting enabled. Power is reported only when actual power in Watts (in real time changes for more than set percentage comparing to previous actual power in Watts, step is 1%. NOTE: when power is changed for more than percent value in this parameter -> the device is reporting also: • A (Current) (if the value has changed) • V (Voltage) (if the value has changed) • Power Factor (if the value has changed) • kvar (Reactive power) (if the value has changed) • kWh (Energy – Active power accumulated Import) (if the value has changed) • kWh (Energy – Active power accumulated Export) (if the value has changed) • kVAh (Energy – Apparent power accumulated) (if the value has changed) • kvarh (Energy – Reactive power accumulated) (if the value has changed) To avoid unintended reporting (electric disturbances, noise, etc..) the measured power less than 5W is not reported.
42
2
600
Reporting on time interval
• Default value 600 (10 minutes) • 0-599 = reporting disabled • 600 - 32535 = 600 seconds - 32535 seconds. Reporting enabled. Report is send with the time interval set by entered value. NOTE: The device is reporting the following values: • W (Active Power) (if the value has changed) • A (Current) (if the value has changed) • V (Voltage) (if the value has changed) • Power Factor (if the value has changed) • kvar (Reactive power) (if the value has changed) • kWh (Energy – Active power accumulated Import) (if the value has changed) • kWh (Energy – Active power accumulated Export) (if the value has changed) • kVAh (Energy – Apparent power accumulated) (if the value has changed) • kvarh (Energy – Reactive power accumulated) (if the value has changed)
45
1
0
Reset Power counters
• Default value 0 • 0 – no function • 1 – reset counter 1 –kWh import • 2 – reset counter 2 – kvarh • 4 – reset counter 3 – kVAh • 8 – reset counter 4 – kWh export • 15 – reset ALL counters
Association Group Information V2
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Configuration
COMMAND_CLASS_CONFIGURATION
CRC16 Encapsulation
COMMAND_CLASS_CRC_16_ENCAP
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V4
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Meter V4
COMMAND_CLASS_METER_V4
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Security S2
COMMAND_CLASS_SECURITY_2
Supervision
COMMAND_CLASS_SUPERVISION
Transport Service V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2
Version V2
COMMAND_CLASS_VERSION_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Exclusion
REMOVAL FROM A Z-WAVE NETWORK (Z-WAVE EXCLUSION)

1. Connect the device to the power supply

2. Make sure the device is within direct range of your Z-Wave gateway (hub) or use a hand-held Z-Wave remote to perform exclusion

3. Enable add/remove mode on your Z-Wave gateway (hub)

4. Press and hold the S service button between 0.2 and 6 seconds

5. The device will be removed from your network but custom configuration parameters will not be erased

Inclusion
AUTOMATICALLY ADDING THE DEVICE TO A Z-WAVE NETWORK (AUTO INCLUSION)

1. Enable add/remove mode on your Z-Wave gateway (hub)

2. Automatic selection of secure/unsecure inclusion

3. The device can be automatically added to a Z-Wave network during the first 2 minutes

4. Connect the device to the power supply

5. Auto-inclusion will be initiated within 5 seconds of connection to the power supply and the device will automatically enrol in your network

ⓘ NOTE: For S2 inclusion please check chapter – »16. Z-Wave Security«.

MANUALLY ADDING THE DEVICE TO A Z-WAVE NETWORK (MANUAL INCLUSION)

1. Connect the device to the power supply

2. Enable add/remove mode on your Z-Wave gateway (hub)

2. Toggle the Service button S between 0.2 and 6 seconds

3. A new multi-channel device will appear on your dashboard

Factory Reset
FACTORY RESET

1. Connect the device to the power supply

2. Press and hold the S service button between 6 seconds and 20 seconds

3. Device will be removed from you network

ⓘ By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted. Use this reset procedure only when the main gateway (hub) is missing or otherwise inoperable.

S2 Authenticated
S2_AUTHENTICATED
S2 Unauthenticated
S2_UNAUTHENTICATED
Switch Load Capacity Current
The amount of switch load energy the product is rated for in Amps
Supported Meter Type
Indicate which type of metering is supported by the device.
Firmware Updatable
Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.
Color
If the product is only available in one color, pick the color from the list.

 

Reviews

Grade 
01/21/2022

Medidor para EV

Utilizo Qubino Smart Meter para controlar la carga de mi vehiculo electrico. Lo recomiendo.

Write your review!

Write a review

QUBINO Smart Meter - Z-Wave electrical consumption measurement module for DIN rail

QUBINO Smart Meter - Z-Wave electrical consumption measurement module for DIN rail

Power consumption meter module Z-Wave Plus Qubino Smart Meter for DIN rail mounting of electrical panel. Calculate the energy, power and power factor of the measured signals among other values.

Accessories

10 other products in the same category:

Customers who bought this product also bought: