The ceiling and interior access point...
The ceiling and interior access point for high density environments IP-COM AP365 is a high performance Gigabit Wi-Fi access point, prepared for high density environments. Through 802.11ac Wi-Fi technology and enhanced transmission power and reception sensitivity, you can increase coverage range, improve access density and stability of operation
Warning: Last items in stock!
Access point IP-COM AP365 Wireless 802.11 a / b / g / n 1750 Mbps (1450 + 300) dual band fed via PoE 802.3at (Including Injector). Includes 2 Gigabit LAN ports, one POE 802.3at (injector included) Up to 20 dBm of power in 2.4 GHz band and 20 dBm in 5 GHz band. Compatible with AC2000 and M50 controller for centralized management.
The IP-COM AP365 is the new generation of ceiling or wall access points of the IP-COM brand. This dual band device reaches up to 1200 Mbps of speed, perfectly supporting up to 25 users connected by band. It also has a Gigabit port, compatible PoE at to receive power. Lastly, it can be handled individually or managed through different models of hardware controllers of this manufacturer.
The IP-COM AP365 are enterprise-grade, high-performance Gigabit Wi-Fi access points, prepared for high-density environments. Through the 802.11ac Wi-Fi technology and improved transmission power as well as its reception sensitivity, you can increase the coverage range, improve the access density and the stability of the operation of the Wi-Fi networks.
Ï Two simultaneous radios of 2.4Ghz 802.11n / g / by 5Ghz 802.11ac / n / a.
Ï Combined data rate of up to 1200 Mbps.
Ï Standard support 802.3at PoE.
Ï Implemented with IP-COM access controllers, supports Captive Portal, etc.
Under the management and control of the IP-COM AC series, it supports advanced functions such as access control, load balancing, transparent roaming, multiple authentication modes and so on, are ideal for medium-sized companies, conference rooms, multimedia classroom Implementation of WLAN.
Low profile industrial design
With its elegant design and low profile and controllable LEDs, it is perfectly integrated into the decoration of hotels, office environments, commercial facilities, etc.
Lower implementation cost
Supporting the PoE standard, AP can be integrated into your existing 802.3at network and power infrastructure.
The dual band design offers high capacity and high performance to new legacy 802.11ac and 802.11a / b / g / n clients. The 802.11ac Gigabit Wi-Fi together with Gigabit Ethernet, which allows rapid data deployment without any bottlenecks, is ideal for high-bandwidth applications such as video streaming, P2P download and gaming.
Advanced Wi-Fi security
IP-COM AP is compatible with almost all the most recent encryption and authentication mechanisms (such as WEP, WPA-PSK, 802.1X, WEB Portal, social logon).
Automatic RF optimization
Advanced RF optimization with automatic selection of channels, bands and power levels, to reduce co-channel interference. AP can recognize several channels that are being used and automatically switch to the best channel available to provide the best experience for users.
Equity of use time
Equity of time of use is an advanced programming technique that provides equal antenna time to each client regardless of their theoretical data rate. This will guarantee a faster download speed and increase the total capacity of the network.
Dual Fat / Fit Mode
When the network starts small, the user can acquire the AP and set it to fat mode. As the user grows and more devices are installed, it is recommended to add an IP-COM AC to simplify network administration and centrally manage all APs. You can significantly reduce the implementation and management effort by automating device provisioning, firmware updates, and policy enforcement.
Technical characteristics / specifications
IEEE82.11a, IEEE802.11ac, IEEE 802.11n, 802.11g, 802.11b
2.4 GHz and 5 GHz frequency band
Speed ratio up to 1750 Mbps
1 RJ45 port 10/100/1000 Mbps compatible POE 802.3at
1 RJ45 port 10/100/1000 Mbps
1 DC Jack for power (source included, 12VDC 1.5A)
4x3 dBi Integrated dual band antennas
Maximum consumption 23W
LED Indicator: Power, 2.4G and 5G
MSC7: -72 dBm
AP, WDS, Client + AP (Universal Repeater)
Activate / Deactivate wireless radio
8 SSID for 2.4 GHz and 4 for 5 GHz
Allows SSID hiding
Wireless client isolation and limitation
Supports Fast Roaming
Supports 802.1Q, up to 4094 VLAN and VLAN assignment over SSID
Supports Energy Saving (APSD)
Supports Multicast to Unicast conversion
Supports Traffic Shapping
Supports Airtime Fairness
Supports Band Steering
Supports spectrum analysis
Supports automatic channel control
Adjustable transmission power 1 dBm
Limitation of connections by MAC address
Supports DHCP server
Security: 64 / 128bit WEP, WPA-PSK, WPA2-PSK, WPA and WPA2-PSK, WPA, WPA2
Supports VPN Pass through: PPTP or L2TP
Supports Page Timeout
Network diagnostics by PING
Date and time settings
List of wireless clients
Configuration Through web browser with possibility of update or using M50 controller, AC2000
26 dBm ± 2dBm (2.4 GHz band)
Temperature: Operation: -10 ~ 45 ; Storage: -30 ~ 70
Humidity: Operation: 10% ~ 90%; Storage: 10% ~ 90%
Access point AP365
POE 802.3at injector
Certificates: CE, FCC and RoHS