FIBARO Starter Pack Calefación (Cabezal Termostatico + Sensor Temperatura) View larger

FIBARO Starter Pack Calefación (Cabezal Termostatico + Sensor Temperatura)

FGBHT-001

New

In Stock

94,99 €

Technical characteristics

Technology HomeKit

Download

Extended Z-Wave info

Name: The Heat Controller
Manufacturer:FIBARO
Identifier:FGT-001
Z-Wave Certification Number:ZC10-20026869
Hardware Plattform:ZM5101
FLiRS:YES
Role Type:Listening Sleeping Slave
Short Description:FIBARO Heat Controller is a Z-Wave controlled thermostatic head mounted on radiator valves. Device works also with a dedicated temperature sensor.
Description:FIBARO Heat Controller is a remotely controlled thermostatic head to control temperature in the room. It measures the temperature and automatically adjust the heat level. It can be mounted without tools on three types of thermostatic radiator valves. It is also possible to create schedules via app to easily manage temperature throughout the week. Main features: • to be installed on three types of valves: M30 x 1.5, Danfoss RTD-N and Danfoss RA-N, • compatible with any Z-Wave or Z-Wave Plus Controller, • supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 with PRNG-based encryption, • built-in battery recharged through standard micro-USB port, • easy installation - no tools required, • can use dedicated temperature sensor, • supports heating schedules, • automatic calibration, • anti-freeze function, • decalc function, • unconstrained rotation spherical knob to set desired temperature.

Manual download HERE.

Group
Max Nodes
Description
1
5
Z-Wave Plus Lifeline association group that reports the device status and allows for assigning single device only (main controller by default)
Number
Size (Bytes)
Default Value
Name
Description
1
4
240
Override Schedule duration
This parameter determines duration of Override Schedule after turning the knob while normal schedule is active (set by Schedule CC).
2
4
1
Additional functions
This parameter allows to enable different additional functions of the device.
3
4
0
Additional functions status (READ-ONLY)
This parameter allows to check statuses of different additional functions.
Application Status
COMMAND_CLASS_APPLICATION_STATUS
Association Group Information V2
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Basic
COMMAND_CLASS_BASIC
Battery
COMMAND_CLASS_BATTERY
Clock
COMMAND_CLASS_CLOCK
Configuration
COMMAND_CLASS_CONFIGURATION
CRC16 Encapsulation
COMMAND_CLASS_CRC_16_ENCAP
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V4
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Multi-Channel Association V3
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
Multi-Channel V4
COMMAND_CLASS_MULTI_CHANNEL_V4
Notification V8
COMMAND_CLASS_NOTIFICATION_V8
Powerlevel
COMMAND_CLASS_POWERLEVEL
Protection
COMMAND_CLASS_PROTECTION
Schedule
COMMAND_CLASS_SCHEDULE
Security S0
COMMAND_CLASS_SECURITY
Security S2
COMMAND_CLASS_SECURITY_2
Sensor Multilevel V5
COMMAND_CLASS_SENSOR_MULTILEVEL_V5
Supervision
COMMAND_CLASS_SUPERVISION
Thermostat Mode V3
COMMAND_CLASS_THERMOSTAT_MODE_V3
Thermostat Setpoint V3
COMMAND_CLASS_THERMOSTAT_SETPOINT_V3
Transport Service V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2
Version V2
COMMAND_CLASS_VERSION_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Classic Exclusion
To remove the device from the Z-Wave network:

1. Make sure the device is within the direct range of your Z-Wave controller.

2. Set the main controller into remove mode.

3. Use the included key to quickly triple click the button on the thermostatic head.

4. The LED ring will start blinking white.

5. Wait for the removing process to end.

6. Successful removing will be confirmed by the Z-Wave controller.

Where to find S2 DSK on product
Page 5:



If you are adding in S2 authenticated mode, type in the device pin

code (underlined part of the public key on the label).

Classic Inclusion
To add the device to the Z-Wave network:

1. Make sure the device is within the direct range of your Z-Wave controller.

2. Set the main controller in (security/non-security) add mode.

3. Use the included key to quickly triple click the button on the thermostatic head.

4. The LED ring will start blinking white.

5. If you are adding in S2 authenticated mode, type in the device pin code (underlined part of the public key on the label).

6. Wait for the adding process to end.

7. Successful adding will be confirmed by the Z-Wave controller.

Wake-Up Procedure
FIBARO Heat Controller is a FLiRS device. The FLiRS device alternates between sleep mode and a partially awake mode in which it is listening beam signal. When device receives this beam, it immediately fully wakes up and then communicates with the controller or other Z-Wave device.
Factory Reset Procedure
Please use this procedure only when the network primary controller is missing or otherwise inoperable.

Reset procedure allows to restore the device back to its factory settings, which means all information about the network and user configuration will be deleted.

To perform factory reset:

1. Use the included key to press and hold the button.

2. Release the button when you see yellow LED colour.

3. Click the button to confirm the selection.

4. After finishing resetting the device will be put in Standby Mode. Click the button to activate it again.

S2 Authenticated
S2_AUTHENTICATED
S2 Unauthenticated
S2_UNAUTHENTICATED
Battery Quantity
Enter the number of batteries of the designated type that the product uses.
Battery Type
Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.
Color
If the product is only available in one color, pick the color from the list.
Firmware Updatable
Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.
Sensors
Sensor types supported by the product.
Supported Notification Types
Select the Notification Types that the product handles (controllers), or sends (slaves).
Thermostat HVAC Systems Supported
Indicate which HVAC system or systems are supported by the thermostat.
Thermostat Modes
Select the mode(s) supported by the thermostat.
Thermostat Power Source
Select one or more supported power sources for a thermostat.

 

Reviews

Write a review

FIBARO Starter Pack Calefación (Cabezal Termostatico + Sensor Temperatura)

FIBARO Starter Pack Calefación (Cabezal Termostatico + Sensor Temperatura)

8 other products in the same category: