Sensor designed to detect flood...
Sensor designed to detect flood situations. In case of flood, the device sends an alarm via Z-Wave radio
Warning: Last items in stock!
|Technology||Z-Wave (Comp. con Z-Wave)|
This sensor has been designed to detect flood situations. When there is a flood situation, the device sends an alarm via ZWave radio. This equipment consists of the main unit and the sensor device. The sensor device can be placed at a separation distance of up to 3 m to the main unit. The unit can be mounted on any flat surface. The installation can be done by means of screws, adhesives or double-sided tape. The ST812 is a battery powered device, which is in standby mode until an event is detected. Then a preconfigured device sends the information of its status to the central unit and returns to the standby mode. The batteries can be replaced very easily. When the unit detects the need to replace the batteries, it provides the visual information on the device itself and sends a warning to the Z-Wave controller. This unit sends the information to a controller or any other ZWave associated device. You can control up to 4 Z-Wave devices of this unit. For correct operation of this unit it has to be integrated into a Z-Wave network through a remote control, or any other Z-Wave control unit. To respond according to the expected behavior, a ZWave control unit is needed, for example, a PC management system with a Z-Wave gateway or a ZWave Control Unit.
Technical specifications :