Viewed products





Confianza Online


Zipato Detector de humo Z-Wave+ View larger

Zipato Smoke detector Z-Wave +

ZIP-HS1SA-Z

New

The Zipato smoke sensor keeps you informed of possible fire risks, whether you are at home or from a distance, by sending a Z-Wave alert.

More details

In Stock

39,00 €

Technical characteristics

Technology Z-Wave Plus

More info

The Zipato smoke sensor is designed to emit an alert when smoke is detected. In fact, when the latter detects smoke, a powerful audible alarm is activated and a Z-Wave signal is sent to the main controller.

Therefore, it is possible to create different scenarios activated by this alert.

This detector is a Z-Wave Plus product and, therefore, it is compatible with all the features offered by the 500 series chipset.

You need a Z-Wave controller (remote control, dongle, home automation box, ...) to integrate this detector into your network if you already have an existing network.

FUNCTIONS:

Z-Wave 500 Series
Sound alert and Z-Wave in smoke detection
Low energy consumption
Automatic low battery report
Easy installation

TECHNICAL CHARACTERISTICS :

Protocol: Z-wave Plus (868.42MHz)
Power supply: CR123A battery, 1400mAh
Operating voltage: 3V
Operating current: 90mA
Operating temperature: -10 ° C to + 50 ° C
Radio range: 30 m
Dimensions: 60 x 60 x 50 mm
Weight: 132g
Standards: EMC 2004/108 / CE, R & TTE 1995/5 / EC, LVD 2006/95 / EC, FCC Part 15

Extended Z-Wave info

Name: Smart Smoke Sensor
Manufacturer:Zipato
Identifier:hm-hs1sa-z.eu
Z-Wave Certification Number:ZC10-17115870
Hardware Plattform:ZM5202
FLiRS:NO
Role Type:Reporting Sleeping Slave
Short Description:Zipato Smart Smoke Sensor (Z-Wave) is designed to give early warning of developing fires by sounding the built-in alarm horn, based on Z-Wave technology.
Description:Zipato Smart Smoke Sensor (Z-Wave) is designed to give early warning of developing fires by sounding the built-in alarm horn, based on Z-Wave technology. It can not sense gas, heat, flame and cannot prevent or put out the fire.

Manual download HERE.

Group
Max Nodes
Description
1
1
Association group 1: Lifeline association group Include command classes: Battery report, Notification report, and Device Reset Locally notification, Binary report.
2
5
Association group 2: Root Device group(Binary Sensor) Binary Sensor Command Class: Compatible with 300 series 1-Binary Sensor reports status of smoke or no smoke via Lifeline. 2-When the sensor detects status change between smoke and no smoke, the device will be triggered.
3
5
Association group 3: Root Device group(Notification) 1-Notification reports reports status of detect smoke or no smoke via Lifeline. 2-When the sensor detects status change between smoke and no smoke, the device will be triggered.
Number
Size (Bytes)
Default Value
Name
Description
Association Group Info
COMMAND_CLASS_ASSOCIATION_GRP_INFO
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Battery
COMMAND_CLASS_BATTERY
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Notification V4
COMMAND_CLASS_NOTIFICATION_V4
Powerlevel
COMMAND_CLASS_POWERLEVEL
Sensor Binary V2
COMMAND_CLASS_SENSOR_BINARY_V2
Version V2
COMMAND_CLASS_VERSION_V2
Wake Up V2
COMMAND_CLASS_WAKE_UP_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Inclusion
- Press the Net_Button 3 times within 1.5s, Green LED is Blinking 3 times within 1 second.

- If Inclusion Process is successful, Green led will turn off.
Exclusion
- Press the Net_Button 3 times within 1.5s

- If Exclusion Process is successful, Green led is Blinking 6 times, then turn off.
Factory Reset
-Long press Net_Button while installing batteries in HS1SA-Z.

- Device Reset Locally notification is Transmitted.

-Please use this procedure only when the network primary controller is missing or otherwise inoperable.
Device Wake-Up
- Wake up Notification is transmitted every 24 hours by default.

- Wake up Notification is transmitted after Notification Report is Transmitted
Battery Quantity
Enter the number of batteries of the designated type that the product uses.
Battery Type
Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.
Color
If the product is only available in one color, pick the color from the list.
Supported Notification Types
Select the Notification Types that the product handles (controllers), or sends (slaves).

 

Reviews

Write a review

Zipato Smoke detector Z-Wave +

Zipato Smoke detector Z-Wave +

The Zipato smoke sensor keeps you informed of possible fire risks, whether you are at home or from a distance, by sending a Z-Wave alert.

3 other products in the same category:

Customers who bought this product also bought: