Viewed products





Confianza Online


POPP Z-Wave+ smoke detector with 10 years of autonomy

POPE009402

New

This detector or smoke sensor Z-Wave + detects fire and smoke emissions efficiently. In case of emergency, it triggers an integrated acoustic alarm.

More details

Out of stock

89,95 €

Technical characteristics

Technology Z-Wave Plus

More info

It is the first Z-Wave smoke detector with 10 years of autonomy

The Popp smoke sensor sets new standards in security for your home. There are many potential sources of fire in your own home, such as candles, the fireplace &. Also the iron, some kitchen appliances or many other electrical devices that can be the cause of a fire. It is proven that smoke detectors save lives. This device also has an integrated siren for indoor.

All Z-Wave smoke detectors on the market comply with the EN14064 standard . But most European countries have defined much higher requirements for their local markets. One of the most important certificates is Label Q issued by VDS (3131) . The most important requirement is the life of the battery, which must be 10 years and will extend throughout the life of the sensor. The Popp smoke detector is the first wireless smoke detector based on Z-Wave technology, which has this quality certification.

This device not only saves lives by detecting smoke in homes and offices, but it can also be used to protect assets as an internal siren for security systems. Within the Z-Wave home automation network, the device can be connected to other sensors such as door and window contacts or motion sensors.

Additional features of this new high-end smoke detector include a periodic self-check, using the test button (dust test and special features for rooms (no flicker))

ADVANTAGE:

  • First smoke detector in the world with wireless Z-Wave technology and a 10-year autonomy
  • Meets CERTIFICATION Q issued by VDS
  • It can last up to 10 years
  • secure communication
  • SMART Compensation of dust
  • Independent operation or with home automation controller for home automation
  • It can also be used as an independent indoor siren
  • Easy to install
  • periodic self-test
  • automatic battery warning, when the level becomes less than 20%
  • Protection against manipulation
  • Z-Wave Plus technology

TECHNICAL CHARACTERISTICS :

  • Module type: Z-Wave Transmitter
  • Energy: Lithium battery
  • Battery life: 10 years
  • Frequency: 868.42 MHz
  • Transmission distance: 100 m open field, 40 m indoors
  • Protection: IP20

Extended Z-Wave info

Name: 10 Year Smoke Detector and Siren
Manufacturer:Z-Wave.Me
Identifier:009402
Z-Wave Certification Number:ZC10-16015002
Hardware Plattform:ZM5202
FLiRS:YES
Role Type:Listening Sleeping Slave
Short Description:EN 14604 certified 10 Year Smoke Detector with built in Z-Wave controllable siren function
Description:This products consists of a standard high-quality photo electric Smoke detector with a pluggable Z-Wave wireless interface module. The Smoke detector will also work as a stand alone product and is certified by VDS as '10 year Smoke Detector' The smoke chamber of the detector has a stainless steel reel with antistatic plastic chamber. A button allows on-device test of smoke chamber, electronics and battery. The device also offers a built-in self test and an electronic smoke chamber test to avoid the use of test aerosol. A low battery warning will last for 30 days but full function of the detector is guaranteed during this time. The Z-Wave module allows to report the smoke and low battery alarm wirelessly to a central controller. The detector can also be used as a wireless siren for alarm system or other applications.

Manual download HERE.

Group
Max Nodes
Description
1
10
Z-Wave Plus Lifeline
2
10
Alarm Reports. All devices in this group will receive Alarm notifications (Smoke , Battery Low, Tamper)
3
10
Switching Command. All devices in this group will receive a BASIC SET command on Smoke Alarms. Configuration parameter 3 and 4 will define when ON and when OFF is sent.
Number
Size (Bytes)
Default Value
Name
Description
1
1
10
Siren alarm sequence interval
The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the interval in seconds.
2
1
8
Siren alarm tone length
The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the sound versus silence within this interval. Please make sure this value is always smaller (shorter time) than parameter 1 that defines the whole sequence.
3
1
99
Value of On-Command
This value is sent as BASIC Set to Association Group 3 when an Smoke Alarm occurs.
4
1
0
Value of Off-Command
This value is sent as BASIC Set to Association Group 3 when an Smoke Alarm is cleared.
Basic
COMMAND_CLASS_BASIC
Inclusion
To include the device start the inclusion on your controller and then hit the little button on the wireless module for 1 second
Exclusion
To exclude the device start the inclusion on your controller and then hit the little button on the wireless module for 1 second
Factory Reset
To reset the device keep the button pushed for 10 seconds. After 5 seconds the led starts flashing and after another 5

seconds there is a short beep signaling the successful reset back to factory defaults. Use this procedure only when the network primary controller is missing or otherwise inoperable.

 

Reviews

Write a review

POPP Z-Wave+ smoke detector with 10 years of autonomy

POPP Z-Wave+ smoke detector with 10 years of autonomy

This detector or smoke sensor Z-Wave + detects fire and smoke emissions efficiently. In case of emergency, it triggers an integrated acoustic alarm.

Accessories

3 other products in the same category:

Customers who bought this product also bought: