Smoke sensor with Zipato Z-Wave...
Smoke sensor with Zipato Z-Wave technology. The Zipato smoke sensor keeps you informed of potential fire risks if you are at home or away, by sending Z-Wave alerts.
Warning: Last items in stock!
This Zipato Z-Wave plus smoke sensor is designed to give an early warning of smoke detection. In fact, when smoke is detected, an audible alarm sounds, and a Z-Wave signal is sent to the home automation controller.
Therefore, it is possible to create different scenarios triggered by this alert.
This detector is a more Z-Wave product and, therefore, it is compatible with all the features offered by the 500 series chipset.
A Z-Wave controller (remote control dongle, home automation controller, ...) is necessary to integrate the detector into your Z-Wave network, if you already have an existing network.
Z-Wave 500 series allows multi-channel operation and higher data rates (9.6 / 40/100 kbps)
sound alert and a smoke detector Z-Wave
Lower energy consumption
automatic low battery reports
OTA firmware update
TECHNICAL CHARACTERISTICS :
Protocol: Z-Wave Plus (868.42MHz)
Food: CR123A, 1400mAh
Operating voltage: 3V
Operating current: 90mA
Operating temperature: 0 ° C - 40 ° C
Radio Range: 30m
Dimensions: 120 x 120 x 50mm
Weight: 132 g
Standards: EMC 2004/108 / CE R & TTE 1995/5 / CE, LVD 2006/95 / CE, FCC Part 15, EN14604.