Viewed products





Confianza Online


Popp Smoke Sensor with Z-Wave Plus siren function for indoor

POPE004001

New

Smoke sensor Z-Wave Plus from the manufacturer Popp. It has an interesting built-in siren function to alert at the place of placement of the smoke detector.

More details

Out of stock

69,90 €

Technical characteristics

Technology Z-Wave Plus

More info

The smoke detector of Z-Wave technology with internal siren function of the POPP manufacturer, sets a new standard of insurance in your home.

There are a lot of potential sources of fire within its four walls, such as candles or a kitchen. Even an iron, appliances or kitchen utensils or an infinity of appliances that can be the beginning of a fire.

Without a doubt, smoke detectors can save lives. In case of fire or smoke emission, every minute, every second, gives us the opportunity to extinguish a fire at its beginning, or evacuate people and flee as soon as possible to avoid personal injury and major regrets. The Z-Wave smoke sensor with siren function detects effective fire and smoke emission sources very effectively. In case of an emergency, it alerts acoustically and sends alarm signals to the Z-Wave network in such a way that the other identical smoke detectors, installed and within range, are also alarmed so that they emit the alarm signal of their integrated siren. This operation ensures that the fire alarm reaches directly to the people of the room, or even other plants, something very important, especially at night when the inhabitants of the house or building are asleep.

Thanks to the Z-Wave wireless technology you can define actions and domotic scenes linked and controlled by the Domotic Control Unit in case of alarm. To increase safety, the escape routes can be illuminated by lighting domotization or opening or closing shutters and doors.

Intelligent houses domotizadas with Z-Wave provide us a valuable time in case of alarm to evacuate people or oneself away from danger and allows us to get safe.

Beyond these functions, the Z-Wave smoke detector can be used as a separate indoor siren that can be integrated into an existing security system. Within the Z-Wave intelligent home network the smoke detector can be connected to other sensors such as doors and windows, contacts or motion sensors independently to a home automation control center. In case of alarm, the acoustic signal will be different from the signal in case of fire.

  • If a smoke detector generates an alert, it will forward to all other POPP smoke detectors that are in the Z-Wave network automatically and without configuring anything in the Home Automation Control Unit
  • A wireless bidirectional protocol ensures very high security and status messages
  • Very loud acoustic alarm
  • Indoor siren function

Extended Z-Wave info

Name: Smoke Detector and Siren
Manufacturer:Popp
Identifier:POPE004001
Z-Wave Certification Number:ZC10-16125371
Hardware Plattform:ZM5202
FLiRS:YES
Role Type:Listening Sleeping Slave
Short Description:EN 14604 certified Smoke Detector with built in Z-Wave controllable siren function
Description:This products consists of a standard photo electric Smoke detector with a pluggable Z-Wave wireless interface module. The Smoke detector will also work as a stand alone product and is certified according to EN 14604. The smoke chamber of the detector has a stainless steel reel with antistatic plastic chamber. A button allows on-device test of smoke chamber, electronics and battery. The device also offers a built-in self test and an electronic smoke chamber test to avoid the use of test aerosol. A low battery warning will last for 30 days but full function of the detector is guaranteed during this time. The Z-Wave module allows to report the smoke and low battery alarm wirelessly to a central controller. The detector can also be used as a wireless siren for alarm system or other applications. The wireless module is operated by the 9V battery of the smoke detector. An optional external power supply allows external powering the unit. According to VdS 3515 (Smoke Detectors with Wireless Communication) this device will send alarm signals to all other smoke detectors registered in association group 2 to turn on their siren. This function ensures that all smoke detectors will issue noise if one of them detected a smoke.

Manual download HERE.

Group
Max Nodes
Description
1
4
Z-Wave Plus Lifeline
2
4
Alarm Reports
3
4
Switch Command when Alarm
Number
Size (Bytes)
Default Value
Name
Description
1
1
10
Siren alarm sequence interval
The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the interval in seconds.
2
1
8
Siren alarm tone length
The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the sound versus silence within this interval.
3
1
99
Value of BASIC On-Command
This defines what command is sent into association group 2
4
1
0
Value of BASIC Off-Command
This defines what command is sent into association group 2
Basic
COMMAND_CLASS_BASIC
Notification V5
COMMAND_CLASS_NOTIFICATION_V5
Security S0
COMMAND_CLASS_SECURITY
Association Group Info
COMMAND_CLASS_ASSOCIATION_GRP_INFO
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Basic
COMMAND_CLASS_BASIC
Battery
COMMAND_CLASS_BATTERY
Configuration
COMMAND_CLASS_CONFIGURATION
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V3
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V3
Manufacturer Specific
COMMAND_CLASS_MANUFACTURER_SPECIFIC
Notification V5
COMMAND_CLASS_NOTIFICATION_V5
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Sensor Binary V2
COMMAND_CLASS_SENSOR_BINARY_V2
Switch Binary
COMMAND_CLASS_SWITCH_BINARY
Version V2
COMMAND_CLASS_VERSION_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Factory Reset
To reset the device keep the button pushed for 10 seconds. After 5 seconds the led starts flashing and after another 5

seconds there is a short beep signaling the successful reset back to factory defaults. Use this procedure only when the network primary controller is missing or otherwise inoperable.
Inclusion
To Include, hit the little button on the wireless module for 1 second
Exclusion
To Exclude, hit the little button on the wireless module for 1 second
Battery Quantity
Enter the number of batteries of the designated type that the product uses.
Battery Type
Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.
Color
If the product is only available in one color, pick the color from the list.

 

Reviews

Write a review

Popp Smoke Sensor with Z-Wave Plus siren function for indoor

Popp Smoke Sensor with Z-Wave Plus siren function for indoor

Smoke sensor Z-Wave Plus from the manufacturer Popp. It has an interesting built-in siren function to alert at the place of placement of the smoke detector.

3 other products in the same category:

Customers who bought this product also bought: