Viewed products





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es

Smoke detector Z-Wave Plus by Fibaro

FIB_FGSD-002

New

Smoke detector (2nd generation Fibaro) elegant design to incorporate wireless networks of devices based on Z-Wave Plus

More details

In Stock

75,08 €

-15%

88,33 €

Technical characteristics

Technology Z-Wave Plus

More info

According to the new European standard CE EN 14 604, with smooth and careful lines, with a polished touch surface and small size, this smoke detector will warn you of a threat with multicolored LEDs and with an integrated siren. Detects the minimum amount of smoke to offer a quick response. It is very easy to install in your home, business or office to protect goods and people.

As some materials burn without releasing smoke, Fibaro's engineers have decided to include additional protection in their smoke detector in the form of a temperature sensor. If the amount of smoke was not enough to activate the alarm, the device will be able to detect a threat by detecting the sudden increase in temperature caused by the fire. A rapid temperature change or an increase in temperature above 54 ° C is sufficient for the smoke detector to understand that there is a threat and inform the people in the house. This smoke sensor provides VERY high efficiency, regardless of the material that can be burned.

Fibaro has done everything possible in the design of its smoke detector, anticipating all possible scenarios, making it compatible with alarm systems and offering communication with or without cable. The sensor can be installed as needed, regardless of whether a power supply can be connected, whether the walls allow wireless communication, or what type of wired alarm system is used. Fibaro has thought of all the options to meet their needs.

The sensor can be connected to a power supply of 12 VDC or 24. Or leave it in battery mode and with up to 3 years of continuous operation (depending on the parameterization).

The sensitivity of the sensor can be adjusted depending on where it is installed. In the kitchen, a very sensitive sensor could activate the alarm, for example when frying a food, so it should be less sensitive, helping to prevent false alarms. In other rooms, where the presence of smoke is less likely, under normal conditions, the sensor must be set to the maximum sensitivity to provide the best protection.

A "black box" integrated in the smoke detector records the information on smoke and temperature levels. The alarm system is armed or disarmed. The sensor monitors the smoke level and sends the information to the main controller periodically. Now you can detect the smallest amount of smoke.

For your safety, and to ensure that the smoke detector works properly, it has been equipped with functionality to test the coverage of the Z-Wave network. Z-Wave wireless mesh network communication keeps you connected to the controller even over long distance and through indirect connectivity with other Z-Wave modules. The integrated LED allows you to easily check if the sensor has good coverage and if it can communicate with the Control Unit or if it requires a different location.

A Z-Wave Control Unit (dongle or gateway) is required to integrate this module into the Z-Wave network, if you do not already have an existing Z-Wave network.

FUNCTIONS:

  • Smoke detector Z-Wave Plus
  • Can be connected to any alarm system (dry contact output, potential free)
  • Powered by battery or external power supply
  • Adjustable sensor sensitivity (3 levels)
  • Protection against sabotage
  • Signal by siren sound, LED light and Z -Wave messages
  • Fire detection by measuring the air temperature
  • Test of automatic operation. It is done every 5 seconds
  • "Black Box" integrated - records the reports of the sensors as well as the temperature and smoke data
  • Integrated Z-Wave network coverage test
  • Firmware upgradeable in wireless mode from Fibaro Home Center 2
  • Ease of installation - just install in a place with fire risk

SPECIFICATIONS :

  • Module type: Z -Wave PLUS transmitter
  • Power supply: from 12 to 24 V DC
  • Battery type: CR123A
  • Battery life: 3 years
  • External power consumption: 0.4 W
  • Maximum admitted output current (SMOKE NC, NC LAT): 25mA
  • Maximum nominal voltage output (NC SMOKE, NC LAT): 24V (AC or DC)
  • Frequency: 868.42 MHz
  • Transmission distance: 50 meters free field. 30 meters indoors
  • Dimensions: 65 x 28 mm (diameter x height)
  • Operating temperature: 0-40 ° C
  • Temperature measurement range: -20 to 100 º C
  • Accuracy of the measurement: 0.5 ° C (in a range of 0 to 40 ° C)
  • Standards: EMC 2004/108 / EC and R & TTE 199/5 / WE

Reviews

Grade 
11/18/2021

Funciona bien con HA

Bune funcionamiento con Home Assistant

Grade 
07/13/2020

Diseño bueno

Un diseño exquisito y un funcionamiento más que correcto. Muy satisfecho

Write your review!

Write a review

Smoke detector Z-Wave Plus by Fibaro

Smoke detector Z-Wave Plus by Fibaro

Smoke detector (2nd generation Fibaro) elegant design to incorporate wireless networks of devices based on Z-Wave Plus

5 other products in the same category:

Customers who bought this product also bought: