Viewed products

Confianza Online

RFPLAYER - two-way radio USB interface 433 / 868Mhz



The USB interface to "talk" 433Mhz radio. and 868 Mhz. The RFPlayer RFP1000 dongle connects your devices and wireless " NO-Z-Wave" home automation devices that work with protocols such as Somfy RTS, Delta Dore X2D, Visonic, Chacon / DiO, etc ...

More details

Out of stock

149,00 €

More info

The RFPlayer RFP1000 device is the first USB "spike" that makes your home multilingual !
RFPlayer RFP1000 connects to the USB port of popular domotic controllers, other wireless domotic devices that are already installed in the home or office and that work in the most common protocols based on:

- Somfy RTS (blinds, doors)
- DELTADORE X2D (alarm, heating, home automation)
- VISONIC (alarm)
- CHACON / DIO (home automation)
- OREGON SCIENTIFIC (weather station devices)

RFPlayer - compatible

The RFPlayer RFP1000 USB interface is bidirectional and also emits while simultaneously receiving 433 and 868Mhz radio frequency. The "dongle" RFPlayer RFP1000 connects via USB to the home automation controller and multiplies its ability to interact with its environment. It has the most sophisticated mechanisms to maximize its performance:

- OSD (One practices Decoder)
- LBT (Listen Before Talk)
- High noise immunity due to SAW filters (Surface Acoustic Wave)

The RFPlayer RFP1000 has other resources to handle protocols that are unknown to him:

- RFPlayer RFP1000 knows how to cooperate with the open source community through its compatible RFLINK interface. RF Player saves frames or unknown radio frames and provides the software for RFLINK analysis for use in home automation. By contrast, RFPlayer RFP1000 knows radio broadcast frames invented by RFLINK software.
- RFPlayer RFP1000 features the parrot function: an amazing companion!

RFPlayer Parrot

PARROT function

If learned, memorizes PARROT known with large 868Mhz radio frequency accuracy and frames 433 mhz. He just has to listen. His understanding of frames is "phonetic".

Subsequently, he will be able to:
- Recognize the real time if they appear in the air, a very useful information for the domotic controller,
- From reissue when the automation of the desire box timely.

Parrot fits the unknown.

RFPlayer Repeater Function

Repeater function

Home automation transmissions are subject to the magnitude of the problems. This is the:
- In a phenomenon called "fading" that can occur even in a relative proximity between the transmitter and the receiver of the signal,
- In the attenuation of the intrinsic signal with distance.

The RFP1000 is connected to a USB-220V power source "independent" mode to ensure the repeater function, which will amplify the signal again, drastically reducing the probability of fading. Consequently, the range is greatly increased and the RFI exchanges carried out with greater reliability.

The repetition is intelligent:
- The frames are recognized and reformed,
- RFPlayer wait for the best moment to retransmit the signal to avoid RF collisions.

Parrot can contribute to this repetition is the least we can ask a parrot!

RFPlayer Parrot

Transcoder function

The TRANSCODER feature allows the repeater to convert the fly frames from one protocol to another output protocol, including those stored by Parrot.

A cost remote with numerous channels can replace more expensive remote controls from other manufacturers with fewer channels ... an Automation closed box (without USB port) can extend the reach of your covered protocols ...

An alarm is able to take into account previously inaccessible information ... Everyone wins in connectivity.

The RFPLayer RFP1000 comes with two antennas and a USB cable. A multiplatform configuration / installation software will be available for download at

The Multi-protocol USB RFPlayer RFP1000 device works with the following systems:

Protocols and Brands Frequency MHz Gateway emission capability Gateway reception capability Repeater Transcoder
VISONIC 433,920
Yes PowerCode Yes PowerCode / SecureCode Yes PowerCode / Securecode Yes PowerCode / Securecode
CHACON / DIO / OTIO / AC / COCO / INTERTECHNO / ORNO 433,920 Yes Yes Yes Yes
DOMIA / ARC 433,920 Yes Yes Yes Yes
X10 433,920 Yes Yes Yes Yes
DELTADORE X2D 433,920 Yes Yes Yes Yes
DELTADORE X2D 868,350 Yes Yes Yes Yes
SOMFY RTS 433,420 Yes Yes Yes Yes
BLYSS 433,920 Yes Yes Yes Yes
KD101 433,920 Yes Yes Yes Yes
PARROT (Learn & Play) 433/868 Yes Yes Yes Yes
OREGON V1, V2.1, V3.0 433,920 Do not Yes Yes Do not
OWL Probes 433,920 Do not Yes Yes Do not

Compatibility with popular domotic controllers

RFPlayer RFP1000 is compatible with the main producers of Smart Home box

Compatible with domotica of eedomus vera jeedom


The emitter and receiver RF of 433 MHz and 868 MHz
Supports a wide range of sensors and actuators
Support for X10 and compatible with devices (X'dom, Ebode ...)
compatible devices Chacon support
compatibility with the Delta Dore X2D protocol
Compatibility with the RTS Somfy protocol (blinds, blinds, ...)
Support for Visonic and compatible PRO detectors (433 MHz and 868 MHz frequency)
support probes Oregon Scientific (V1, V3 and V2.1)
help counters OWL power consumption (CM130, CM119 and CM160)
PARROT function of learning and retransmitting radio frames
Repeater function to increase the radio range of the devices
Transcoder to convert a received frame to another protocol
With the support of many programs and automation box
Product manufactured in France


Power supply: via USB
Frequency: 433Mhz and 868Mhz
Type: Transmitter / Receiver
Connectivity: USB
Dimensions (L x W x H): 112.45 mm x 34 mm x 16.7 mm
Weight: 120 g


Write a review

RFPLAYER - two-way radio USB interface 433 / 868Mhz

RFPLAYER - two-way radio USB interface 433 / 868Mhz

The USB interface to "talk" 433Mhz radio. and 868 Mhz. The RFPlayer RFP1000 dongle connects your devices and wireless " NO-Z-Wave" home automation devices that work with protocols such as Somfy RTS, Delta Dore X2D, Visonic, Chacon / DiO, etc ...


18 other products in the same category:

Customers who bought this product also bought: