Viewed products





Confianza Online


Reduced price! Sensor puerta / ventana clasico Z-Wave plus de Aeotec View larger

Classic door / window sensor Z-Wave + by Aeotec GEN5

AEOEZW120

New

Detector on whether a door or window is open or closed. It consists of a magnetic element and the main unit. One of the parts is mounted on the moving part of the window or the door; the other part is placed on the frame. The installation can be done with screws or double-sided tape.

More details

In Stock

27,99 €

-12,00 €

39,99 €

Technical characteristics

Technology Z-Wave Plus

More info

The door or window opening detector from Aeotec by Aeon Labs offers your Z-Wave network all the intelligence required by modern home automation systems. Its small size and elegant design, adapt to any interior decoration. It attaches to doors and windows and is able to communicate wirelessly with up to five Z-Wave devices in association. It works with batteries and its low consumption allows it to work for years. It is very easy to install.
Technical specifications:
  • Up to 5 associated Z-Wave modules
  • Small, discreet and aesthetic
  • Long duration battery
  • Optimized scope
  • Ease of use and installation
  • Button to include / exclude the detector
  • Low battery detection

Extended Z-Wave info

Name: Door/ Window Sensor Gen5
Manufacturer:Aeotec
Identifier:ZW120-C
Z-Wave Certification Number:ZC10-15120008
Hardware Plattform:ZM5202
FLiRS:NO
Role Type:Reporting Sleeping Slave
Short Description:Aeon Labs Door/ Window Sensor Gen5 is a smart Z-Wave sensor that can detect the status of door/window's open/close in real time.
Description:Aeon Labs Door/ Window Sensor Gen5 is a smart Z-Wave sensor that can detect the status of door/window's open/close in real time. It’s a security Z-Wave device that supports security encryption. Also it supports the “Over the Air Firmware Updating” that allows you wirelessly update its firmware if needs. It can be included and operated in any Z-Wave network with other Z-Wave certified devices from manufacturers and/or other applications.

Manual download HERE.

Group
Max Nodes
Description
1
5
Group 1 is assigned to the Lifeline association group and every device has 5 nodes to associate. The sensor binary report, basic set or notification report command can be sent in this group when the Sensor is triggered.
Number
Size (Bytes)
Default Value
Name
Description
1
1
1
Which value of the Sensor Binary Report will be sent when the door is Opened/Closed.
To set which value of the Sensor Binary Report will be sent when the door is Opened/Closed.
111
4
0
Set the interval time of battery report.
Set the interval time of battery report. Note: 1, if the value is less than 10, the time unit is second. If the value is more than 10, the time unit is 4 minutes, which means if the value is more than 10 and less than 240, the interval time is 4 minutes. If the value is more than 240 and less than 480, the interval is 8 minutes. 2, if the current battery report falls below the low battery value (configurable parameter 39), it will send battery report=0xFF.
121
4
256
To configure which sensor report will be sent when the Sensor is triggered On/Off.
To configure which sensor report will be sent when the Sensor is triggered On/Off.
2
1
1
Enable/disable wake up 10 minutes when re-power on the Sensor.
Enable/disable wake up 10 minutes when re-power on the Sensor.
255
4
0
Reset the Sensor.
Reset the Sensor.
3
1
1
Which value of the Basic Set will be sent when the door is Opened/Closed.
To set which value of the Basic Set will be sent when the door is Opened/Closed.
39
1
10
Set the low battery value.
Set the low battery value. (10% to 50%).
Basic
COMMAND_CLASS_BASIC
Inclusion
Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action Button that you can find in the back of the product.
Exclusion
Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action Button that you can find in back of the product.
Additional Special Features
Support ""Over the Air Firmware Updating"" and “Z-Wave Security”.
Factory Reset
Press the Action Button once that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable.
Device Wake-Up
Press the Action Button once, which will trigger sending out the Wake up notification command, press and hold the Action Button for 3 seconds, which will toggle on/off the Sensor be waked up for 10 minutes.

 

Reviews

Write a review

Classic door / window sensor Z-Wave + by Aeotec GEN5

Classic door / window sensor Z-Wave + by Aeotec GEN5

Detector on whether a door or window is open or closed. It consists of a magnetic element and the main unit. One of the parts is mounted on the moving part of the window or the door; the other part is placed on the frame. The installation can be done with screws or double-sided tape.

10 other products in the same category:

Customers who bought this product also bought: