Marcador telefónico GSM que aumenta...
Marcador telefónico GSM que aumenta con capacidad de llamar vía GSM y envio de SMS. 5 señales de entrada. 2 salidas. Admite 10 locuciones de voz de hasta 15 segundos, por diferentes usuarios y tipo de entrada. Supports controlar de forma remota el equipo mediante llamada.
Warning: Last items in stock!
|Z-Wave||Si (serie 400 o anterior: no Z-Wave Plus)|
The DB-GSM-ESIM252 GSM telephone dialer, with 1 SIM card slot, available in DIN rail format, increases the versatility of panels, home automation systems and technical alarms with the ability to call via GSM. Add SMS and automatic alerting. Allows remote control. If any of the 5 input signals is activated, it outputs a call and / or an SMS message to the configured telephone numbers. Supports 10 voice announcements of up to 15 seconds, each by different users and input type. Supports remote control of the equipment by call.
It allows the supervision of electrical, home automation, electrical and control devices. You can report about equipment failure or technical signal. Allows remote control device via phone call or SMS. Security, home automation, home automation, general technical alarms, servers or just lighting, heating, garden irrigation system, irrigation system for greenhouses, roof gardens and control of the garage door through a mobile phone are just a few. application examples.
Supports configuration via USB and SMS. There is an Eldes configuration tool for quick and easy configuration. Ability to add users and change settings later with simple short messages too. Conveniently access event logs over the Internet.
You can add GSM GPRS and functionality to almost any security control panel. Expand system capabilities with SMS alerts, automatic phone calls, and Internet event logs.
This GSM dialer has 5 inputs and 2 relay outputs.
It can complement smoke detection and similar systems with GSM capabilities. Alert on fire, danger of floods or the stop of an electrical device through a simple call or SMS, this helps you to react quickly and avoid further damage to your property.
Up to 5 users can use this GSM system. Up to 10 auto-dial messages can be pre-recorded. Configure which different users / phones are going to receive alerts about the devices for which they are responsible. Choose between automatic call or SMS, perhaps prefer to receive status alerts from both + about reboots and device failures. For example: Find out when the food vending machine is full of coins by SMS, this will help you avoid unnecessary checking, or monitor the ventilation system in your shopping center accurately. The system reports device errors as well. For example: Traffic management company will be informed if the unexpected failure happens.