Viewed products





Confianza Online


Everspring AD147 - Mini enchufe regulador (dimmer) Z-Wave plus

EVR_AD1472

New

Mini regulator plug that is designed to control / regulate / "dim" the on and off of lighting and electrical equipment in your home.

More details

Out of stock

44,90 €

Technical characteristics

Technology Z-Wave Plus
Characteristic Dimmer

More info

Mini plug dimmer designed to control the switching on and off of lighting and electrical equipment in your home. It also allows a regulation function that is only compatible with light bulbs. With a voltage of 220 - 240 V, this plug converter can support a load between 11 W to 250 W.
This mini dimmer plug is a device compatible with Z-Wave "is designed to work with all networks compatible with Z-Wave." It can be controlled by a remote control, PC software or any Z-Wave controller in your network.


CHARACTERISTICS:
Turn on / off lamps from a distance
Module switch / dimmer plug-in directly from a socket and the load you want to control
ON / OFF and the regulator function
Local support control through the integrated button
Z-Wave + technology
Small dimensions to go almost unnoticed
Status LEDs on the integrated button
Repeater function Z-Wave

TECHNICAL CHARACTERISTICS :
Module type: Z-Wave receiver
Power: 230 V, 50 Hz
Consumption: 0.6W
Recommended power: resistive load <250W
Incandescent bulb: <250W
Dimmable LED bulb: 6W to 250W
Frequency: 868.42 MHz
Range: up to 70 m outside, up to 30 m in buildings
Display: LED on the button
dimensions:
Length (including connector): 74mm
Diameter: 52 mm

Extended Z-Wave info

Name: wireless dimmer plug
Manufacturer:Everspring
Identifier:AD147-2
Z-Wave Certification Number:ZC10-15100008
Hardware Plattform:SD3502
FLiRS:NO
Role Type:Always On Slave
Short Description:The mini Dimmer Plug is designed to control the on/off status of lighting and appliance load in your house.
Description:The mini Dimmer Plug is designed to control the on/off status of lighting and appliance load in your house. The unit also provides dimmer function which is only applicable to light bulbs. At 220-240V voltage, this Dimmer Plug can support connected load of 6W - 250W.

Manual download HERE.

Group
Max Nodes
Description
1
4
General:NA Z-Wave Plus Lifeline
2
4
Control:Key1 On/Off control (Button1)
Number
Size (Bytes)
Default Value
Name
Description
Basic
COMMAND_CLASS_BASIC
Factory Reset
1. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.
2. Within 1 second of step 1, press link key again and hold it until LED is off (about 5 seconds).
3. Node ID is excluded. The device reverts to factory default state and will be in auto-inclusion mode for 4 minutes.
4. Use this procedure only in the event that the network primary controller is missing, or otherwise inoperable
Inclusion
1. Put the Z-Wave Controller into inclusion mode.
2. Press the link key three times within 1.5 seconds to put the unit into inclusion mode.
Exclusion
1. Put the Z-Wave Controller into exclusion mode.
2. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.

 

Reviews

Write a review

Everspring  AD147 - Mini enchufe regulador (dimmer) Z-Wave plus

Everspring AD147 - Mini enchufe regulador (dimmer) Z-Wave plus

Mini regulator plug that is designed to control / regulate / "dim" the on and off of lighting and electrical equipment in your home.

5 other products in the same category:

Customers who bought this product also bought: