Dimmers Z-Wave

Manufacturers

Viewed products





Confianza Online


QUBINO DIN Dimmer Z-Wave Plus

ZMNHSD1

Delivery in 5 days aprox.

The Qubino DIN Dimmer is a DIN rail mounted dimmer for bulbs or fans. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor.

More details

In Stock

69,90 €

Data sheet

Certificación Z-Wave PlusSi
Función DimmerDimmer

More info

What is it used for?

The Qubino DIN Dimmer is a DIN rail mounted dimmer, ideal for remotely controlling and measuring the power consumption of bulbs or fans. It also supports the connection of a digital temperature sensor.

Lights Fan

The smallest of them all.

The Qubino DIN Dimmer module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

Energy wizard.

The Qubino DIN Dimmer can measure the power consumption of the connected electrical device and itself has an extremely low power consumption of just 0.7 W.

The simplest installation.

Extremely small size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:

  1. Remove the switches from the box and disconnect the wires.
  2. Connect the wires to the Qubino module and insert it in the box.
  3. Fix the switches to the box.

Remarkably versatile.

The Qubino DIN Dimmer can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F). It supports the connection of a digital temperature sensor, which is also useful for creating complex scenarios. Every module also acts as a repeater in order to improve the range and stability of the Z-Wave network.

The simplest installation.

Extremely small size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:

  1. Remove the switches from the box and disconnect the wires.
  2. Connect the wires to the Qubino module and insert it in the box.
  3. Fix the switches to the box.

The most tested and most reliable module.

Qubino modules are “install-and-forget” products. Our products are made to last, so we only select and use top-quality electronic components. Our modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.

Technical specifications

Electrical diagram 230VAC Electrical diagram 24VDC

Power supply110 – 230 VAC ± 10%
50 / 60 Hz*, (24–30 VDC)
Rated load current of AC output0.85 A / 230 VAC
Rated load current of DC output0.85 A / 30 VDC
Output circuit power of AC output (resistive load)**200 W (230 VAC)
Output circuit power of DC output (resistive load)21 W (24 VDC)
Power measurement accuracy+/-2 W
Digital temperature sensor range
(sensor must be ordered separately)
-50° ~ +125°C
Operation temperature-10° ~ +40°C
Distanceup to 30 m indoors
(depending on building materials)
Dimensions (WxHxD)18 x 93 x 58 mm
(packaging)(21 x 95 x 64 mm)
Weight (including packaging)50 g (56 g)
Electricity consumption0.7 W
MountingDIN rail
SwitchingMOSFET (trailing edge)

*depending on order code
**max 100 W mono-phase asynchronous fan motor can be connected to DIN Dimmer output.

Additional parameters for pros.

There are 17 additional parameters for expert users. Some of the most useful are:

  • Setting mono-stable or bi-stable switches
  • Automatic turning on/off output after set time
  • Saving the state of the device after a power failure

Download

Reviews

Write a review

QUBINO DIN Dimmer Z-Wave Plus

QUBINO DIN Dimmer Z-Wave Plus

The Qubino DIN Dimmer is a DIN rail mounted dimmer for bulbs or fans. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor.

Accessories

9 other products in the same category:

Customers who bought this product also bought: