Viewed products





Confianza Online


Roller Shutter 2 de Fibaro View larger

Fibaro Roller Shutter 2 control of blinds and garage doors

FGR-222

New

Retractable micro-module hidden in the Fibaro Roller Shutter 2 mechanism box to control louvers, blinds, awnings, garage doors and other devices either wirelessly via Z-Wave or with a switch.

More details

In Stock

59,99 €

Technical characteristics

Technology Z-Wave (Comp. con Z-Wave)

More info

FIBARO Roller Shutter 2 is a micromodule designed to control roller shutters, awnings, venetian blinds, garage doors and other motors or devices powered by single-phase alternating current. FIBARO Roller Shutter 2 allows you to position the shutters or venetian blinds in a precise way. The device is equipped with a consumption and power monitoring function.

Like other micromodules, FIBARO Roller Shutter 2 allows the control of connected equipment either through the Z-Wave network or via the switch or pushbutton directly connected to the micromodule itself.

This device is easily installed inside a wall mechanism box, behind a mechanical or electronic switch and allows to control lattices, blinds, garage doors and other devices via radio, wirelessly through Z-Wave. This device is designed for 3-wire systems and needs a neutral wire from the wall box. It can be operated with remote control or Z-Wave Control Unit. It also has an instantaneous and accumulated consumption measurement function.
Notes for the diagrams:

L terminal for PHASE
N
terminal for the NEUTRAL
S1
terminal for switch # 1 (you have the option to put the device in learning mode)
S2 terminal for switch # 2
Q1 first output terminal for the motor
Q2
second output terminal for the motor
B service button (used to add / remove the device from the Z-Wave network)

Connected Roller Shutter Fibaro
BLIND MOTOR - Connected Roller Shutter Fibaro
MOTOR DOOR GARAGE - Roller Shutter Fibaro
Technical specifications:
  • Working Radio Frequency: 868 MHz
  • Power supply: 110-240 V AC, 50/60 Hz
  • Installation: in universal mechanism case with 50 mm bottom
  • Wiring: 3-wire. Requires neutral cable.
  • Maximum load: 4.2A for lamps and resistive loads, 1.7A for motors with power compensation factor- (inductive loads)
  • Consumption: up to 0.8W
  • End of acrrera supported: mechanical and electronic
  • Type of supported motors: AC single-phase motors
  • Scope of the antenna: 50m in open field and 30m in buildings
  • Environmental operating conditions: 0-40ºC.
  • Power supply: AC 110V-230V / 50-60Hz
  • Dimensions: 17mm x 42mm x 37mm

Certifications in accordance with European Standards RoHS 2011/65 / EU
LVD 2006/95 / EC
EMC 2004/108 / EC
R & TTE 1999/5 / EC

Download

Reviews

Write a review

Fibaro Roller Shutter 2 control of blinds and garage doors

Fibaro Roller Shutter 2 control of blinds and garage doors

Retractable micro-module hidden in the Fibaro Roller Shutter 2 mechanism box to control louvers, blinds, awnings, garage doors and other devices either wirelessly via Z-Wave or with a switch.

4 other products in the same category:

Customers who bought this product also bought: