The Z-Wave Micromodule for the...
The Z-Wave Micromodule for the control of motors for blinds, awnings, blinds, windows, curtains, in short, this Widom micromodule is a device designed to independently control two-way motors.
Warning: Last items in stock!
Out of stock
The WiDom Smart Roller Shutter is a device for multilevel motor control for roller shutters. It allows to control blinds, awnings, curtains and windows and decide the exact level of opening and closing desired. Are you relaxing on the couch and it starts to rain? You can lower the blinds while sitting quietly. All the comfort of controlling your home not only through local switches but also remotely, from your computer, tablet or smartphone.
SELF-CALIBRATION AND MILLIMETRIC PRECISION
MEMORY, ADAPTABILITY AND CUSTOMIZATION
TURN IT OFF AND CLOSE ALL
Using scenes defined in your remote controller, it ensures that the blinds are closed and that all lights are turned off when leaving the house, or when leaving one area of the house to enter another, for example when leaving the living room to enter the sleeping area.
UNIQUE IN ITS SIMPLICITY
Controllable with buttons or switches. It is simply possible to associate a button to one channel and a switch to another.
Multiclic recognition with local load control and associated devices independently
Timing management in on and off mode for both channels independently
UNIQUE FOR ITS SIZE
The world's smallest Z-Wave devices in micromodule format. Our plug & play modules fit into any type of junction box and are easier to install.
WiDom modules are equipped with very precise functions for measuring power consumption.
EASY TO CONTROL
They can be operated with conventional buttons and also from computers, tablets or smartphones, depending on the needs of the moment.
EASIER INSTALLATION THANKS TO ITS RGB LED
An RGB LED provides visual information on its status and on the status of operations in progress. In this way, you always know if the device has been connected correctly, if it is included in the Z-Wave network and if it is working.
Using zero-crossing relays reduces the electrical voltage of the relay contacts and guarantees a longer service life of the devices.
WiDom devices use an S2 security system, with advanced encryption, which provides advanced security features and eliminates the risk of hacking.
WiDom devices have the lowest power consumption among similar devices on the market.
Z-Wave network inclusion / exclusion can be initiated not only by the controller, but also by the device with any sequence of clicks on the integrated button.
Before pairing the device with the help of the built-in button and LED, you can check whether the electrical connection has been made correctly
Control of local load and associated devices independently of the recognition of the click sequence. For example, you can control local loads with a single click and associated devices with a double click.
Power supply: 230 VAC ± 10% 50/60 Hz
Maximum load: 1200 watts
Temperature limit: 105 ° C
Working temperature: -10 ° - 40 ° C
Radio protocol: Wave Z 868.4 MHz
Maximum distance: up to 100m outdoors - up to 40m indoors
Dimensions: 37x37x17 mm
Consumption: <1 watt
Actuating element: Relay
Compliance: CE, RoHs
Degree of protection: IP20
Software update - You can update device firmware "Over the Air" in complete autonomy without removing the devices from their headquarters.