Popp Flow Stop Motor for closure of...
Popp Flow Stop Motor for closure of anti-flood or anti-leakage gas supply valve from the manufacturer Popp
Warning: Last items in stock!
Out of stock
Overflows of bathtubs, breakdowns in washing machines or defects in water or gas pipes, can cause serious damage, even irreparable. The Popp Anti-leak for valve cutting can prevent these situations thanks to the Z-Wave technology. The Popp Anti-leakage valve cut-off consists of a controlled motor for supply cut and automatic cut-off of both water and gas valves. It is equipped with Z-Wave technology for use in smart homes equipped with Z-Wave home automation systems.
Its installation is quite easy: the Popp Anti-leakage for cutting valves, is delivered complete including: the own valve controlled by motor, a power supply, mounting accessories and the Quick Start Guide. It is very easy to install in the current ball valve that has to cut supply. It is used for the most common tubes and valves in all the installations of today, including sizes of ½ and ¾ "(half and three quarters of an inch) It is not necessary to dismantle pipes or valves of passage, nor is it necessary to drain any circuit, since there is nothing to disassemble at the plumbing level, normally the installation can be done in about 5 or 10 minutes.
The Popp Anti-leakage for cutting valves, acts by means of a motor that mechanically closes the current valve as long as it is ball-type (most of those currently installed in Spain). Although the motor requires only 12 Volts (1A), it has a large output force and lever capacity, which allows closing the ball valve in just 10 seconds. A manual closing can even be carried out easily, in case of power failure, thanks to its clutch system bearing.
Once the Anti-leakage Popp for cutting valves is added to a home automation network, such as smart device, through a Z-Wave home automation controller, the Anti-leakage Popp for cutting valves can be operated through any PC, portable , smartphone or tablet. Additionally, in the case of water or gas leakage, the home automation controller when combined with sensors allows stopping a leak automatically, triggering the Popp Anti-leak to cut valves, protecting your home from damage and irreparable costs.
The Anti Popp Leak for cutting valves is a good safety element for your smart home free of unpleasant surprises and high costs due to damage from gas or water leaks.