Actuators Z-Wave

Manufacturers

Viewed products





Confianza Online


Panic button and remote control Z-Wave by BENEXT

BE_PANICBUTTON

New

Three-button Z-Wave remote control used to arm / disarm your alarm system, you can also execute a quick and easy home automation scene. It has a panic button to which you can configure the activation time

More details

In Stock

52,95 €

Technical characteristics

Technology Z-Wave (Comp. con Z-Wave)

More info

Small in size, this three-button remote control with panic button allows you to send a wireless signal via radio via the Z-Wave protocol to the gateway control unit or home automation controller. When the Z-Wave home automation controller detects the signal, properly configured an email or some notification to a predefined target person, raise a scene, trigger an alarm, etc.

The red button is meant to be used as a panic button. Very suitable for the elderly or the elderly or with reduced mobility since the panic button allows to alert of any problem in case of emergency. This way we can know if the user of the system needs help.

This Z-Wave remote control with panic button has two other buttons . One of the buttons has an open padlock and the other a closed padlock. They are usually used to arm and disarm an alarm system , although we could also give it the purpose of turning on a light, opening a motorized door, raising and lowering shutters ...

These three buttons are completely configurable , according to the needs. It is important to consider that you need a Z-Wave home automation control unit, which is not included, to be able to use this 3 button remote control with 1 of them panic.

It works with a single CR2032 battery with an estimated life of approx. 4 years under normal conditions. The command with panic button automatically sends a notification to the Z-Wave home automation controller when the battery level is less than 20%.

Download

Reviews

Write a review

Panic button and remote control Z-Wave by BENEXT

Panic button and remote control Z-Wave by BENEXT

Three-button Z-Wave remote control used to arm / disarm your alarm system, you can also execute a quick and easy home automation scene. It has a panic button to which you can configure the activation time

9 other products in the same category:

Customers who bought this product also bought: