Viewed products





Confianza Online


GR-SMARTHOME - Z-Wave motor to open and close water or gas valves

GR-105

New

Z-Wave motor to domotize and allow us to open and close ball-type valves of 1/4 turn, which allows to cut the passage of water or gas in case of contingency. It allows to continue maintaining a manual control of the ball valve. It is necessary to have a Z-Wave controller to work properly.

More details

In Stock

67,19 €

-16%

79,99 €

Technical characteristics

Technology Z-Wave Plus

More info

The motorization controlled by Z-Wave GR-105 for 1/4 turn ball type valves allows to domotize a standard valve and control it remotely via Z-Wave wireless technology.

This application of the domotica using this motor controlled by Z-Wave is ideal to react autonomously and neglect in case of flood or in case of water or gas leakage. Associated with a flood detector or a gas detector, it will be able to avoid accidents and unfortunate situations.

It can also be opened by the Z-Wave home automation controller, this motor can also be used for irrigation. It can be configured through a domotic control unit or Z-Wave controller to open at a predefined time and thus water the garden. The motorization controlled by Z-Wave GR-105 for ball-type valves of 1/4 turn also has the function of Z-Wave repeater node.

A Z-Wave home automation controller (also called gateway, control unit ..) is required for the motor to work properly in the Z-Wave network.

FONCTIONS:

  • Z-Wave motorization for 1/4 turn ball type valves
  • Coupe l'arrivée d'eau automatiquement if unite fuite ou inondation est détectée (if associé avec a détecteur d'inondation)
  • Cut off the water supply automatically if a leak or flood is detected (if associated with a flood detector)
  • It can be used as an irrigation device
  • Opening and closing function via Z-Wave
  • Z-Wave repeater function
  • Manual activation in case of power failure
  • 1 button to manually activate the valve and the inclusion / exclusion of the Z-Wave network
  • 1 Led indicator
  • Installs in standard diameter tubes for 3/4 "valves

CHARACTERISTIQUES TECHNIQUES:

  • Module type: Slave Z-Wave
  • Power supply: 12VDC 1A (adapter supplied)
  • Frequency: 868.42 Mhz
  • Transmission distance: 50m in open field, 30m in interior
  • Pair: 30 ~ 60 kg.cm
  • Closed time: 5 ~ 10 seconds
  • Opening temp .: 5 ~ 10 seconds
  • Max valve pressure: 1.6 Mpa
  • Diameter of the valve: 3/4 "

Extended Z-Wave info

Name: Auto Valve
Manufacturer:U-Fairy G.R. IOT Tech Co. ltd
Identifier:GR-105
Z-Wave Certification Number:ZC10-15100018
Hardware Plattform:ZM5202
FLiRS:NO
Role Type:Always On Slave
Short Description:Water shut off controller, no plumbing required
Description:Automatic Water shut off controller, fits over standard 1/2”, 3/4” and 1” ball valves, no plumbing required, 12V DC power, Blue LED status indicator, 500 Series Z-Wave. Includes mounting kit and and AC Adapter and quick start guide, Z-Wave and FCC certified. Prevents water damage when combined with standard smart home automation solutions.

Manual download HERE.

Group
Max Nodes
Description
1
5
Z-Wave Plus Lifeline
Number
Size (Bytes)
Default Value
Name
Description
Inclusion
1. Follow the instructions for your Z-wave certified controller to include a device to the Z-wave network.
2.Once the controller is ready to include your device, press the red button 3 times to include it in the Z-wave network.
Exclusion
1. Follow the instructions for your Z-wave certified controller to exclude a device to the Z-wave network.
2.Once the controller is ready to exclude your device, press the red button 3 times to exclude it from the Z-wave network.
Factory Reset
Press and hold the button 10 seconds and release the button. The device will send the reset notification to the list node in the group1 and erases the device memory , when the light flash it is resetting success.
Note: This should only be used in the event your networks primary controller is missing or otherwise inoperable.

 

Reviews

Write a review

GR-SMARTHOME - Z-Wave motor to open and close water or gas valves

GR-SMARTHOME - Z-Wave motor to open and close water or gas valves

Z-Wave motor to domotize and allow us to open and close ball-type valves of 1/4 turn, which allows to cut the passage of water or gas in case of contingency. It allows to continue maintaining a manual control of the ball valve. It is necessary to have a Z-Wave controller to work properly.

10 other products in the same category:

Customers who bought this product also bought: