Viewed products





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es

GR-SMARTHOME - Z-Wave + Motor (Chip 700) for 1/4 turn valves

GR-105-ZW7

New

Z-Wave motor to domotize and allow us to open and close 1/4 turn "ball" type valves, which allows cutting off the flow of water or gas in case of contingency. Allows you to continue to maintain manual control of the ball valve. It is necessary to have a Z-Wave controller for it to work properly.

More details

Out of stock

79,98 €

Technical characteristics

Technology Z-Wave 700 Series

More info

The motorization controlled by Z-Wave GR-105-ZW7 (Chip 700) for 1/4 turn ball valves allows to domotise a standard valve and control it remotely using Z-Wave wireless technology.

This application of home automation using this Z-Wave controlled motor is ideal to react autonomously and unattended in the event of flooding or in the event of water or gas leaks. Associated with a flood detector or a gas detector, you will be able to avoid accidents and unfortunate situations.

It can also be opened by the Z-Wave home automation controller, this motor can also be used for irrigation. It can be configured through a home automation control unit or Z-Wave controller to open at a predefined time and thus water the garden. The GR-105-ZW7 Z-Wave controlled valve motorization for 1/4 turn ball valves also has the Z-Wave repeater node function.

A Z-Wave home automation controller (also called a gateway, control unit ..) is necessary for the motor to function properly within a Z-Wave network.

FUNCTIONS:

  • Z-Wave motorization for 1/4 turn ball type valves
  • Shut off the water supply automatically if a leak or flood is detected (if associated with a flood detector)
  • Can be used as an irrigation device
  • Opening and closing function via Z-Wave
  • Z-Wave repeater function
  • Manual activation in case of power failure
  • 1 button to manually activate the valve and the inclusion / exclusion of the Z-Wave network
  • 1 Led indicator
  • Installs in standard diameter pipe for valves up to 3/4 "

TECHNICAL CHARACTERISTICS :

  • Module Type: Z-Wave Slave
  • Alimentation: 12VDC 1A (adapter supplied)
  • Frequency: 868.42 Mhz
  • Transmission distance: 100m in open field, 30m indoors
  • Torque: 30 ~ 60 kg.cm
  • Closing time: 5 ~ 10 seconds
  • Opening temps: 5 ~ 10 seconds
  • Max valve pressure: 1.6 Mpa
  • Valves size allowed 1/2, 3/4, 1, 1.25, 1.5
    Closing time 5 ~ 10 seconds
    Opening time 5 ~ 10 seconds
    Tightening torque 30 ~ 60 kg.cm

Reviews

Write a review

GR-SMARTHOME - Z-Wave + Motor (Chip 700) for 1/4 turn valves

GR-SMARTHOME - Z-Wave + Motor (Chip 700) for 1/4 turn valves

Z-Wave motor to domotize and allow us to open and close 1/4 turn "ball" type valves, which allows cutting off the flow of water or gas in case of contingency. Allows you to continue to maintain manual control of the ball valve. It is necessary to have a Z-Wave controller for it to work properly.

12 other products in the same category:

Customers who bought this product also bought: